MCU-Link Pro Debug Probe

MCU-LINK-PRO

Roll over image to zoom in

Jointly developed by NXP and Embedded Artists, the MCU-Link Pro is a fully featured debug probe that can be used with MCUXpresso IDE and 3rd party IDEs that support CMSIS-DAP and/or J-Link protocols. MCU-Link Pro is based on NXP’s MCU-Link architecture, found in the MCU-Link low cost debug probe and on board evaluation boards, and runs the same firmware as all these implementations. In addition to SWD debug, SWO profiling and a USB to UART bridge features (VCOM) found in the base MCU-Link, the Pro model adds a J-Link LITE firmware option, energy measurement, analog signal monitor, USB to SPI and I2C bridging capability and an on-board LPC804 for peripheral emulation. MCU-Link Pro is based on the dual Arm® Cortex-M33® core LPC55S69 microcontroller, and features a high speed USB interface, providing high performance debug at low cost.

The USB bridging feature is supported by the free LIBUSBSIO host library from NXP.

MCU-Link is compatible with Windows 10 and 11, MacOS and Linux. A free utility from NXP, also included with the LinkServer package, provides an easy way to install firmware updates.

Supported Devices

Processors and Microcontrollers

LPC1500 Arm Cortex-M3

  • LPC1519JBD64: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1518JBD64: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1549JBD48: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1547JBD64: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1518JBD100: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1517JBD48: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1549JBD100: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1519JBD100: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1548JBD100: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1548JBD64: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1547JBD48: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1517JBD64: Motion Control 32-bit Microcontroller based on Arm® Cortex®-M3

i.MX RT Crossover MCUs

  • i.MX-RT1024: i.MX RT1024: Crossover MCU with Arm® Cortex®-M7
  • i.MX-RT1015: i.MX RT1015 Crossover MCU with Arm® Cortex®-M7 Core Operating Up to 500 MHz
  • i.MX-RT600: i.MX RT600 Crossover MCU with Arm® Cortex®-M33 and DSP Cores
  • i.MX-RT500: i.MX RT500 Crossover MCU with Arm® Cortex®-M33, DSP and GPU Cores
  • i.MX-RT1160: i.MX RT1160 Crossover MCU Dual-Core Arm® Cortex®-M7 and Cortex-M4
  • i.MX-RT1010: i.MX RT1010 Crossover MCU with Arm® Cortex®-M7 Core Operating Up to 500 MHz
  • i.MX-RT1020: i.MX RT1020: Crossover MCU with Arm® Cortex®-M7
  • i.MX-RT1064: i.MX RT1064: Crossover MCU with Arm® Cortex®-M7
  • i.MX-RT1170: i.MX RT1170: 1 GHz Crossover MCU with Arm® Cortex® Cores
  • i.MX-RT1060: i.MX RT1060: Crossover MCU with Arm® Cortex®-M7
  • i.MX-RT1050: i.MX RT1050 Crossover MCU with Arm® Cortex®-M7 Core

K2x / KS2x USB

  • K22_120: Kinetis® K22-120 MHz, Cost Effective, Full-Speed USB Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K21_120: Kinetis K21-120 MHZ, Full-Speed USB, Anti-Tamper Microcontrollers based on Arm® Cortex®-M4
  • K20_120: Kinetis® K20-120 MHz, Full-Speed USB, Mixed-Signal Integration Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K20_72: Kinetis® K20-72 MHz, Full-Speed USB, Mixed-Signal Integration Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K24_120: Kinetis® K24-120 MHz, Full-Speed USB, 256KB SRAM Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K20_100: Kinetis® K20-100 MHz, Full-Speed USB, Mixed-Signal Integration Microcontrollers based on Arm® Cortex®-M4 Core
  • K28_150: Kinetis® K28-150 MHz, 2x USB, Core Voltage Bypass, 2MB Flash, 1MB SRAM MCUs based on Arm® Cortex®-M4
  • K21_50: Kinetis® K21-50 MHz, Full-Speed USB, Anti-Tamper Microcontrollers based on Arm® Cortex®-M4 Core
  • K22_50: Kinetis® K22-50 MHz, Cost Effective, Full-Speed USB Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K20_50: Kinetis® K20-50 MHz, Full-Speed USB, Mixed-Signal Integration Microcontrollers based on Arm® Cortex®-M4 Core
  • K26_180: Kinetis® K26-180 MHz, Dual High-Speed and Full-Speed USBs, 2MB Flash Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K27_150: Kinetis® K27-150 MHz, 2x USB, 2MB Flash, 1MB SRAM Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K22_100: Kinetis® K22-100 MHz, Cost Effective, Full-Speed USB Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core

K3x Segment LCD

  • K30_100: Kinetis® K30-100 MHz, Mixed-Signal Integration Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K30_72: Kinetis K30-72 MHz, Mixed-Signal Integration Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core

K7x Graphic LCD

  • K70_120: Kinetis® K70-120–150 MHz, High-Speed USB, Ethernet, DDR and Anti-Tamper Microcontrollers Based on Arm® Cortex®-M4 Core

General Purpose MCUs

  • LPC51U68: High-Performance, Power-Efficient and Cost Sensitive Arm® Cortex®-M0+ MCUs

K6x Ethernet

  • K60_100: Kinetis® K60-100 MHz, Mixed-Signal Integration Microcontrollers based on Arm® Cortex®-M4 Core
  • K65_180: Kinetis® K65-180 MHz, Dual High-Speed and Full-speed USBs, 2MB Flash, Anti-Tamper Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K64_120: Kinetis® K64-120 MHz, 256 KB SRAM Microcontrollers (MCUs) Based on Arm® Cortex®-M4 Core
  • K60_120: Kinetis® K60/61-120–150 MHz, Mixed-Signal Integration and Anti-Tamper Microcontrollers based on Arm® Cortex®-M4 Core
  • K63_120: Kinetis® K63-120 MHz, 256KB SRAM, Anti-Tamper Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K66_180: Kinetis® K66-180 MHz, Dual High-Speed and Full-speed USBs, 2MB Flash Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core

KE Series Arm Cortex-M4/M0+

  • KE02: Kinetis® KE02-20 MHz, Entry-Level Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
  • KE06: Kinetis® KE06-48 MHz, Mainstream with CAN Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
  • KE1xF: Kinetis KE1xF-168MHz, Performance with CAN 5V Microcontrollers based on Arm® Cortex®-M4
  • KE1xZ: KE1xZ: Arm® Cortex®-M0+ 5V Main Stream MCU with NXP Touch and CAN Control
  • KE02_40: Kinetis® KE02-40 MHz, Entry-Level Microcontrollers (MCUs) based on Arm® Cortex® -M0+ Core
  • KE04: Kinetis® KE04-48 MHz, Mainstream Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core

K32 L Series Arm Cortex-M4/M0+

  • K32-L3: NXP’s Energy Efficient Cortex-M4 MCU with Cortex-M0+ and Advanced Security
  • K32-L2: Ultra-Low-Power, Highly Integrated MCU

KL Series Arm Cortex-M0+

  • KL3x: Kinetis® KL3x-48 MHz, Segment LCD Ultra-Low-Power Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
  • KL1x: Kinetis® KL1x-48 MHz, Mainstream Small Ultra-Low Power Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
  • KL8x: Kinetis® KL8x-72/96 MHz Secure Ultra-Low Power Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
  • KL4x: Kinetis® KL4x-48 MHz, USB, Segment LCD, Ultra-Low-Power Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
  • KL2x: Kinetis® KL2x-72/96 MHz, USB Ultra-Low-Power Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
  • KL0x: Kinetis® KL0x-48 MHz, Entry-Level Ultra-Low Power Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core

K5x Measurement

  • K51_72: Kinetis® K51-72 MHz, Segment LCD, USB Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K50_100: Kinetis® K50-100 MHz, USB Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K53_100: Kinetis® K53-100 MHz, USB, Segment LCD, Ethernet Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K50_72: Kinetis® K50-72 MHz, USB Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core
  • K51_100: Kinetis® K51-100 MHz, Segment LCD, USB Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core

KM Series Arm Cortex-M0+

  • KM3x: 50–75 MHz Precision Metrology MCUs with Segment LCDs Based on Arm® Cortex®-M0+
  • KM1x: 50 MHz, Mainstream Precision Metrology Microcontrollers based on Arm® Cortex®-M0+

LPC800 Arm Cortex-M0+

  • LPC8N04: Low-Cost Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
  • LPC82X: LPC820: 32-Bit Arm® Cortex®M0+-Based Low-Cost MCU
  • LPC84X: LPC840: 32-Bit Arm® Cortex®-M0+-Based Low-Cost MCU
  • LPC81X_LPC83X: LPC810 and LPC830: 32-Bit Arm® Cortex®-M0+-Based Low-Cost MCU
  • LPC80X: LPC800: 32-Bit Arm® Cortex®-M0+-Based Low-Cost MCU

LPC1100 Arm Cortex-M0+/M0

  • LPC11E00: Scalable Entry Level 32-bit Microcontroller (MCU) based on Arm® Cortex®-M0+ and Cortex®-M0 Cores
  • LPC1100: Scalable Entry Level 32-bit Microcontroller (MCU) based on Arm Cortex-M0 Cores
  • LPC11C00: Scalable Entry Level 32-bit Microcontroller (MCU) based on Arm® Cortex®-M0 Cores
  • LPC11AXX: Scalable, Entry-Level 32-bit Microcontrollers (MCUs)
  • LPC11U00: Scalable Entry Level 32-bit Microcontroller (MCU) based on Arm® Cortex®-M0+ and Cortex®-M0 Cores

LPC5500 Arm Cortex-M33

  • LPC552x-S2x: LPC552x/S2x: Mainstream Arm® Cortex®-M33-based Microcontroller Family
  • LPC55S6x: High Efficiency Arm® Cortex®-M33-Based Microcontroller Family
  • LPC551X-S1X: LPC551x/S1x: Baseline Arm® Cortex®-M33-Based Microcontroller Family
  • LPC550x: LPC550x/S0x: Baseline Arm® Cortex®-M33-Based Microcontroller Family
  • LPC553x: LPC553x/S3x: Advanced Analog Arm®Cortex®-M33-Based MCU Family

KV Series Arm Cortex-M4/M0+/M7

  • KV4x: Kinetis KV4x-168 MHz, High Performance Motor / Power Conversion MCUs based on Arm® Cortex®-M4
  • KV3x: Kinetis® KV3x-100–120 MHz,  Advanced 3ph FOC / Sensorless Motor Control MCUs based on Arm® Cortex®-M4
  • KV5x: Kinetis® KV5x-240 MHz, Motor Control and Power Conversion, Ethernet, MCUs based on Arm® Cortex®-M7
  • KV1x: Kinetis® KV1x-75 MHz,  Entry-Level 3ph FOC / Sensorless Motor Control MCUs based on Arm® Cortex®-M0+

K8x Secure

  • K82_150: Kinetis® K82-150 MHz HW Cryptographic Co-Processor and QuadSPI Microcontrollers (MCUs) Based on Arm® Cortex®-M4 Core
  • K81_150: Kinetis K81-150 MHz HW Cryptographic Co-Processor, Anti-Tamper and QuadSPI Microcontrollers (MCUs) Based on Arm® Cortex®-M4 Core
  • K80_150: Kinetis® K80-150 MHz Advanced Security and QuadSPI Microcontrollers (MCUs) Based on Arm® Cortex®-M4 Core

K0x Entry-Level

  • K02_100: Kinetis® K02-100 MHz, Microcontrollers (MCUs) with Optimized Features based on Arm® Cortex®-M4 Core

LPC54000 Arm Cortex-M4

  • LPC541XX: Low-Power Microcontrollers (MCUs) Based on Arm® Cortex®-M4 Cores With Optional Cortex®-M0+ Co-processor
  • LPC546XX: Power-Efficient Microcontrollers (MCUs) With Advanced Peripherals Based on Arm® Cortex®-M4 Core
  • LPC540XX: Power-Efficient Microcontrollers (MCUs) with Advanced Peripherals Based on Arm® Cortex®-M4 Core

LPC1800 Arm Cortex-M3

  • LPC18S57JET256: 32-Bit Arm® Cortex®-M3 MCU; 1 MB Flash and 136 KB SRAM; Ethernet, Two High-Speed USB, LCD, EMC, AES Engine
  • LPC1853JBD208: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1827JBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC18S10FET100: 32-Bit Arm® Cortex®-M3 Flashless MCU with Security Features; 136 KB SRAM; EMC
  • LPC1820FBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1830FET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1833JET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC18S50FET180: 32-Bit Arm® Cortex®-M3 Flashless MCU with Security Features; 200 KB SRAM; Ethernet, Two HS USB, LCD, EMC
  • LPC18S30FET100: 32-Bit Arm® Cortex®-M3 Flashless MCU with Security Features; 200 KB SRAM; Ethernet, Two HS USB, EMC
  • LPC1822JBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC18S57JBD208: 32-Bit Arm® Cortex®-M3 MCU; 1 MB Flash and 136 KB SRAM; Ethernet, Two High-Speed USB, LCD, EMC, AES Engine
  • LPC1823JET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC18S50FET256: 32-Bit Arm® Cortex®-M3 Flashless MCU with Security Features; 200 KB SRAM; Ethernet, Two HS USB, LCD, EMC
  • LPC1837JET100: High Performance 32-bit Microcontroller (MCU) based on Arm® Cortex®-M3 Core
  • LPC18S37JBD144: 32-Bit Arm® Cortex®-M3 MCU; 1 MB Flash and 136 KB SRAM; Ethernet, Two High-Speed USB, EMC, AES Engine
  • LPC1812JET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1837JET256: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1810FET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1833JBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1853FET256: High Performance 32-bit Microcontroller (MCU) based on Arm® Cortex®-M3 Core
  • LPC1813JET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1827JET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1817JET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1830FET256: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1850FET180: Quad SPI Flash Interface (SPIFI), 200 KB SRAM, Two High-Speed USB, Ethernet, LCD, TFBGA180 Package
  • LPC1830FBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1850FET256: Quad SPI Flash Interface (SPIFI), 200 KB SRAM, Two High-Speed USB, Ethernet, LCD, LBGA256 Package
  • LPC1817JBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1813JBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1825JBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1857JET256: High Performance 32-bit Microcontroller (MCU) based on Arm® Cortex®-M3 Core
  • LPC18S30FBD144: 32-Bit Arm® Cortex®-M3 Flashless MCU with Security Features; 200 KB SRAM; Ethernet, Two HS USB, EMC
  • LPC1810FBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1833JET256: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1830FET180: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1815JET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1825JET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1812JBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC18S30FET256: 32-Bit Arm® Cortex®-M3 Flashless MCU with Security Features; 200 KB SRAM; Ethernet, Two HS USB, EMC
  • LPC1833FET256: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1837JBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1822JET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1837FET256: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1820FET100: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1815JBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1823JBD144: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC1857JBD208: High Performance 32-bit Microcontroller (MCU) based on Arm® Cortex®-M3 Core
  • LPC1857FET256: 1 MB Flash, 136 KB SRAM, Two High-Speed USB, Ethernet, LCD, LBGA256 Package
  • LPC1853JET256: High Performance 32-bit Microcontroller based on Arm® Cortex®-M3
  • LPC18S10FBD144: 32-Bit Arm® Cortex®-M3 Flashless MCU with Security Features; 136 KB SRAM; EMC
  • LPC18S37JET100: 32-Bit Arm® Cortex®-M3 MCU; 1 MB Flash and 136 KB SRAM; Ethernet, Two High-Speed USB, EMC, AES Engine

MCX N Series Microcontrollers

  • MCX-N94X-N54X: MCX N94x/54x Highly Integrated Multicore MCUs with On-Chip Accelerators, Intelligent Peripherals and Advanced Security

MCX A Series Microcontrollers

  • MCX-A14X-A15X: MCX A14x/15x MCUs with Arm® Cortex® M33, Scalable Device Options, Low Power and Intelligent Peripherals

Features

Microcontrollers (MCU)

  • LPC55S69 dual Arm Cortex M33 MCU running at 150MHz
  • LPC804 MCU for peripheral emulation

Debug

  • CMSIS-DAP and J-Link LITE compatible firmware options
  • SWD target debug
  • SWO trace/profiling I/O support
  • Energy measurement down to sub 200 nA resolution at 1% typical accuracy
  • Analog signal monitor (1.2 to 3.6 V)
  • Option to power target system (1.8 V or 3.3V up to 400 mA)
  • Supports target debug for systems running from 1.2 V to 5 V

Connectivity

  • VCOM interface with cable to connect to target system (TXD, RXD, ground)
  • High-speed USB
  • USB to I2C and SPI bridging

User interface

  • Multiple status LEDs for ease of use

Supported IDEs

  • Compatible with MCUXpresso IDE
  • Compatible with tools/IDEs that support CMSIS-DAP or J-Link protocol
  • Compatible with MCUXpresso for VS Code

Buy Options

MCU-LINK-PRO-Image

Click to expand

  • MCU-LINK-PRO

  • MCU-Link Pro Debug Probe.

  • Kit Contains

    • MCU-Link Pro debug probe
    • 10 pin to 10 pin Cortex debug cable
    • 10 pin to 20 pin Cortex debug cable
    • Digital port / analog input adaptor cable
    • Spare jumpers
  • $45.99 USD
  • For a quantity of 1
    • Availability: In stock
    • Inventory: 49
    • Shipping: Normally ships 1-2 business days
Buy from NXPBuy From Distributor

Documentation

Quick reference to our documentation types.

Filters

3 documents

Design Resources

Design Files

Filters

2 design files

Software

Filters

5 software files

Note: For better experience, software downloads are recommended on desktop.

Support

What do you need help with?

  • Narrow your search
Search