Kinetis KE1xF-168MHz, Performance with CAN 5V Microcontrollers based on Arm® Cortex®-M4
Design Files
Quick reference to our
design files types.
KE1xZ: Arm® Cortex®-M0+ 5V Main Stream MCU with NXP Touch and CAN Control
KE1xZ MCUs are based on the Arm®Cortex®-M0+ core, running up to 96 MHz. These MCUs support up to 512 KB flash, 96 KB RAM, and a complete set of analog/digital features. The robust TSI module with up to 50 channels provides a high level of stability and accuracy to any HMI system. The 1-Msps ADC and FlexTimer modules provide an ideal solution for BLDC motor-control systems.
The MSCAN IP is ideal for the CAN node control and auto after car market applications.
This device is fully supported by NXP's MCUXpresso Software and Tools, a comprehensive and cohesive set of free software development tools for Kinetis, LPC and i.MX RT microcontrollers. MCUXpresso SDK also includes project files for Keil MDK and IAR Embedded Workbench for Arm.
Product Details
Features
- Up to 96 MHz Cortex-M0+ core supporting a broad range of processing bandwidth requirements while maintaining excellent cost-effectiveness, easy to use packages and a wide range of memory densities
- Enhanced robust IOs make sure the high performance under noisy environment
- Robust TSI supports both mutual cap mode and self-cap mode, providing flexibility for up to 72 touch keys
- Implementation of CAN protocol - Version 2.0A/B, support both standards and extended data frames, up to 1Mbps data rate
- Flextime featured up to 8ch PWM supports 3-phase motor control with dead time insertion and fault detect
- 1MSPS 12b ADC with up to 24ch input per module provides fast sampling rate for prompt data conversion and storage
- Analog comparator for fast response to external analog change
- Programmable delay block with flexible trigger system providing various interconnections for on-chip modules, ADC, DAC, Flextimers, CMP, etc
- FlexIO provides flexibility for serial communication interface implementation
- Boot ROM provides on-chip boot code and serial port drivers that could save flash space and provide flexible boot options and in system programming support
- Faster time to market with comprehensive enablement solutions, including SDK (drivers, libraries, stacks), IDE, bootloader, RTOS, online community and more
- Supported by MCUXpresso SDK, IDE and Config Tools
Related products
Kinetis® KE02-20 MHz, Entry-Level Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
Kinetis® KE02-40 MHz, Entry-Level Microcontrollers (MCUs) based on Arm® Cortex® -M0+ Core
MCX A13x, 14x, 15x MCUs with Arm® Cortex® M33, Scalable Device Options, Low Power and Intelligent Peripherals
Kinetis® KE04-48 MHz, Mainstream Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
1-5 of 42 documents
-
Data Sheet
Kinetis KE15Z/14Z with up to 256 KB Flash
-
Data Sheet
Kinetis KE1xZ with up to 64 KB Flash
-
Reference Manual
Kinetis KE17Z/13Z/12Z with up to 512 KB Flash Reference Manual
Design Resources
Hardware
Quick reference to our
board types.
1-5 of 17 hardware offerings
-
Adapters, Cables, SocketsTouch Module for Freedom BoardFeatured
-
Evaluation and Development BoardsFreedom Development Platform for 48MHz KE1xZ64/32 MCUsFeatured
-
Evaluation and Development BoardsFreedom Development Platform for Kinetis® KE1xMCUsFeatured
-
Additional hardware available. View our featured partner solutions.
-
Evaluation and Development BoardsFRDM Development Board for 96 MHz KE17Z/KE13Z/KE12Z with 512 KB Flash MCUsFeatured
-
Evaluation and Development BoardsFreedom Development Platform for 72MHz KE17Z/KE13Z/KE12Z MCUsFeatured
Software
Quick reference to our software types.
1-5 of 9 software files
-
HMI Design Software
NXP Touch Solution for Kinetis KE15Z MCU FamilyFeatured
-
BSPs and Device Drivers
MCUXpresso Config Tools: Pins, Clocks and PeripheralsFeatured
-
HMI Design Software
Touch-Sensing Software
-
Additional software available. View our featured partner solutions.
-
HMI Design Software
Touch Software
-
Code Snippets
MCU Bootloader for NXP Microcontrollers
Note: For better experience, software downloads are recommended on desktop.
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
4 engineering services
-
Independent Design House (IDH)
Hardware Design Services
-
Independent Design House (IDH)
Low Power RF
-
Independent Design House (IDH)
Hardware/Software development and testing
.svg)
-
Independent Design House (IDH)
Embedded Software Design
To find additional partner offerings that support this product, visit our Partner Marketplace.