KW39/38/37 32-Bit Bluetooth 5.0 Long-Range MCUs|NXP

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Click over video to play

KW39/38/37 wireless MCUs integrate long-range capability with Bluetooth Low Energy version 5.0 and generic FSK radio. Achieving -105 dBm sensitivity with LE-coded 125 kbit/s data rate allows for connections in harsh environments and at extended distances. The innovative data stream buffer allows the capture of radio parameters without stalling processor or DMA operations. This capability enables high-accuracy measurements needed for distance and angle approximations. The radio supports up to 8 simultaneous secure connections in any leader/follower combination allowing multiple authorized users to communicate with the device. The KW38 MCU additionally integrates FlexCAN, helping enable seamless integration into an automobile’s in-vehicle or industrial CAN communication network. The FlexCAN module can support CAN’s flexible data rate (CAN FD) for increased bandwidth and lower latency.

Data Sheet

Reference Manual

Product Details

Block Diagram

KW39/38/37 MCUs Block Diagram

Get diagram PDF

Features

MCU and Memories

Up to 48 MHz Arm Cortex-M0+ core
Nested Vectored Interrupt Controller (NVIC)
Wake-up Interrupt Controller (WIC)
Single wire debug (SWD) and micro trace buffer
KW37: 512KB program flash memory w/ ECC
KW39/38
- 256KB program flash memory plus 256KB FlexNVM w/ ECC
- 8KB FlexRAM supporting EEPROM emulation
On-chip 64KB SRAM
Security circuitry to prevent unauthorized access to RAM and flash contents through the debugger

Radio and Features

2.4 GHz Bluetooth Low Energy Version 5.0 radio supporting up to 8 simultaneous hardware connections in any central/peripheral combination
Generic FSK modulation:
- Data Rates: 250, 500 and 1000 kbps
- Modulations: GFSK BT = 0.3, 0.5, 0.7, 1.0; FSK/MSK
- Modulation Index: 0.32, 0.5, or 0.7
High Speed (2 Mbps), Long Range, Advertising Extensions
-98 dBm receiver sensitivity in BLE 1Mbps mode
-105 dBm receive sensitivity in BLE long range 125kbps mode
-101 dBm typical generic FSK (at 250 kbit/s) sensitivity
Programmable Transmitter Output Power: -30 dBm to +5 dBm
Low external component counts for low cost application and reduced form factor
On-chip balun with single ended bidirectional RF port
Supports transceiver range extension using external PA and/or LNA
Enhanced Bluetooth LE automatic deep sleep modes (DSM) supporting Peripheral Latency

Low Power Consumption

Transceiver current (DC-DC buck mode, 3.6 V supply)
- Typical Rx current: 6.3 mA
- Typical Tx current: 5.7 mA @ 0 dBm output
Low Power Mode (VLLS0) Current: 250 nA

Clocks

26 MHz and 32 MHz supported for Bluetooth LE and Generic FSK modes
32.768 kHz Crystal Oscillator

Operating Characteristics

Voltage range: 1.71 V to 3.6 V
Ambient temperature range: –40 to 105 °C
AEC Q100 Grade 2 Automotive Qualification (KW39A/38A/37A)
Industrial Qualification (KW38Z/37Z)

Human-Machine Interface

General-purpose input/output w/ interrupt capability

System peripherals

Nine MCU low-power modes to provide power optimization based on application requirements
DC-DC Converter supporting Buck and Bypass operating modes
Direct memory access (DMA) Controller
Computer operating properly (COP) watchdog
Serial wire debug (SWD) Interface and Micro Trace buffer
Bit Manipulation Engine (BME)

Analog Modules

16-bit Analog-to-Digital Converter (ADC)
6-bit High Speed Analog Comparator (CMP)
1.2 V voltage reference (VREF)

Timers

16-bit low-power timer (LPTMR)
3 Timers Modules(TPM) with PWM capability: One 4- channel TPM and two 2-channel TPMs
Programmable Interrupt Timer (PIT)
Real-Time Clock (RTC)

Communication interfaces

2 serial peripheral interface (SPI) modules
2 inter-integrated circuit (I2C) modules
Low Power UART (LPUART) module with LIN support (2x LPUART on KW38)
Carrier Modulator Timer (CMT)
FlexCAN module (with CAN FD support up to 3.2 Mbps baudrate) on KW38

Security

AES-128 Hardware Accelerator (AESA) with LTC
True Random Number Generator (TRNG)
Advanced flash security on Program Flash
80-bit unique identification number per chip
40-bit unique media access control (MAC) sub-address
LE Secure Connections

Packaging

7 x 7 mm 48HVQFN with “Wettable” flanks and is pin and package compatible with KW36/35/34 family

MCUXpresso Software and Tools

MCUXpresso Config Tools – A comprehensive suite of system configuration tools, including pins, clocks, SDK builder and more.

MCUXpresso SDK – An open-source software development kit (SDK) built specifically for your processor and evaluation board selections.

MCUXpresso IDE – An easy-to-use integrated development environment (IDE) for creating, building, debugging, and optimizing your application.

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌