FS84/FS85 24 V/36 V Safety SBC Evaluation Board for Truck

KITFS85AEEVM Active

Roll over image to zoom in

The KITFS85AEEVM provides flexibility to play with all the features of the device and make measurements on the main part of the application. The KL25Z MCU installed on the board combined with the FlexGUI software allows access to the registers in read and write mode. All regulators are accessible through connectors. Nonuser signals, like DC/ DC switcher node, are mapped on test points.

This board can be operated in Emulation or OTP mode. In emulation mode, as long as the power is supplied, the board configuration stays valid. The OTP mode uses the fused configuration. The device can be fused three times. In OTP mode, the device always starts with the fused configuration, except if the user wants to overwrite OTP configuration using Emulation mode. This board can fuse the OTP without any extra tools or board.

Supported Devices

Power Management

System Basis Chips

  • FS85: Safety System Basis Chip for S32 Microcontrollers, Fit for ASIL D
  • FS84: Safety System Basis Chip for S32 Microcontrollers, Fit for ASIL B

Features

General

  • Digital signals (SPI, I²C, RSTb, etc.) are accessible through connectors. Wake1 pin has a switch to control (Ignition) them
  • A VBAT switch is available to power On or Off the device
  • VBAT power supply connectors (Jack and Phoenix)
  • PRE output capability up to 10.0 A (external MOSFET)
  • VBUCK1/2 in Standalone (default) or Multiphase mode
  • VBUCK3 up to 3.6 A peak
  • VBOOST 5.0 V or 5.74 V, up to 400 mA
  • LDO1 and LDO2, from 1.1 V to 5.0 V, up to 400 mA
  • Ignition key switch
  • FS0B external safety pin
  • Embedded USB connection for easy connection to software GUI (access to SPI/I²C bus, IOs, RSTB, FS0B, INTB, Debug, MUX_OUT, regulators)
  • LEDs that indicate signal or regulator status
  • Support OTP fuse capabilities
  • USB connection for register access, OTP emulation and programming

Buy Options

KITFS85AEEVM-Image

Click to expand

  • KITFS85AEEVM

  • FS84/FS85 24 V/36 V Safety SBC Evaluation Board for Truck.

    • KITFS85FRDMEVM board
    • Power Supply mating connectors
    • USB mini cable Type A Male / Type B Male
  • $377.71 USD
  • For a quantity of 1
    • Availability: Pending Stock
ADD TO CART
Order from distributors

Documentation

Quick reference to our documentation types.

Filters

2 documents

Design Files

Quick reference to our design files types.
Filters

2 design files

Software

Quick reference to our software types.

Filters

3 software files

Note: For better experience, software downloads are recommended on desktop.

Training

Filters

1 trainings

Support

What do you need help with?

  • Narrow your search
Search