Performance Level Digital Signal Controllers, USB FS OTG, CAN FD
Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
Performance Level Digital Signal Controllers, USB FS OTG, CAN FD
The MC56F83xxx family is NXP's performance level digital signal controller product and the world's first DSC product with both USB and CAN FD integrated. It leverages the high-performance 56800EX DSP core, with both core and bus frequency up to 100MHz. Plus the integration of all kinds of high-performance peripherals, this product extends the DSC performance to its highest level, which is extremely suitable for high-performance digital power conversion and high-performance single/dual motor control applications. the MC56F83xxx family is NXP's first DSC product to support dual partition Flash, Flash ECC, USB, CAN FD and boot ROM. In addition, MC56F83xxx family has lots of enhancement include enhanced DMA function (eDMA), more flexible event generator (EVTG), low-power high-speed ADC, extended RAM size and up to 16 channel high-resolution PWM.
For additional information and sample availability, contact your local NXP Sales Office or NXP Authorized Distributor.
Product Details
Block Diagram
Features
Processor Complex
- 100MHz 56800EX DSP core
- JTAG/EOnCE debug controller
Memory
- 128kB Flash
- 20kB SRAM
- 64kB Boot ROM (support I²C, SCI)
System control
- Intermodule crossbar (support flexible connection among peripherals or GPIOs)
- Event Generator (support and/or/nor/xor logic operation and multiple trigger modes)
- Enhanced DMA (support minor and major loop, more flexible data transition and less CPU intervention)
- Memory resource protection
- LVI, POR and brownout reset
- CRC
- Internal and external watchdog
Timers
- Eight channels 312ps high-resolution PWM
- 1x Quad Timer to support four-channel capture
- 1x Quadrature Decoder
- 2x 32-bit PIT
Analog
- 2x 12-bit ADC each w/ x2/4 PGA, each up to 1.6MSps sample rate
- 2x Operational Amplifier, 8MHz GBP, support up to x16 PGA mode
- 1x 12-bit buffered DAC
- 4x Analog Comparator each w/ 8-bit DAC
Communications
- 2x LPI²C, support full PMBus
- 1x SPI
- 2x UART
Packages
- LQFP100
- LQFP80
- LQFP64
- LQFP48
Temperatures
- -40 to 105°C
- -40 to 125°C
Enablements
- MC56F81000-EVK (can connect with low-voltage FRDM-LV driver board)
- HVP-56F81768 EVK (can connect with high-voltage HVP-MC3PH driver board)
- Motor control and digital power reference designs
- CodeWarrior IDE
- Software Development Kit (SDK)
- GUI Config Tools (Pin, Clock, Peripherals)
- FreeMaster debug tool
- PEMicro Multilink and Cyclone support
Certifications
- IEC60730 Class-B Safety
Related products
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
Design Resources
Hardware
Quick reference to our
board types.
1-5 of 10 hardware offerings
-
Evaluation and Development BoardsDevelopment Board for MC56F83xxx Digital Signal ControllersFeatured
-
Emulators, Probes, and ProgrammersUniversal Multilink Development Interface
-
Emulators, Probes, and ProgrammersUniversal Multilink FX High-Speed Development Interface
-
Emulators, Probes, and ProgrammersDSC Multilink
-
Emulators, Probes, and ProgrammersPEmicro Cyclone programmer
Software
Quick reference to our software types.
1-5 of 17 software files
-
BSPs and Device Drivers
Open-CMSIS-Packs
-
BSPs and Device Drivers
MCUXpresso Config Tools: Pins, Clocks and Peripherals
-
BSPs and Device Drivers
56F83xxx USB Stack
-
Code Snippets
MCU Bootloader for NXP Microcontrollers
-
Examples and Quick Start Software
MCUXpresso Software Development Kit (SDK)
Note: For better experience, software downloads are recommended on desktop.