Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
ISO17987 LIN 2.1/SAE J2602 Transceiver
The TJA1021 is the interface between the local interconnect network (LIN) leader/follower protocol controller and the physical bus in a LIN. It is primarily intended for in-vehicle sub-networks using baud rates from 1 kBd up to 20 kBd and is and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016 (12 V). The TJA1021 is pin-to-pin compatible with the TJA1020 and MC33662(B).
The transmit data stream of the protocol controller at the transmit data input (TXD) is converted by the TJA1021 into a bus signal with optimized slew rate and wave shaping to minimize electromagnetic emission (EME). The LIN bus output pin is pulled HIGH via an internal termination resistor. For a commander application, an external resistor in series with a diode should be connected between pin INH or pin VBAT and pin LIN. The receiver detects the data stream at the LIN bus input pin and transfers it via pin RXD to the microcontroller. In Sleep mode, the power consumption of the TJA1021 is very low. In failure modes, the power consumption is reduced to a minimum.
Product Details
Features
General
- LIN 2.1/SAE J2602 compliant
- Baud rate up to 20 kBd
- Very low ElectroMagnetic Emission (EME)
- High ElectroMagnetic Immunity (EMI)
- Passive behavior in unpowered state
- Input levels compatible with 3.3 V and 5 V devices
- Integrated termination resistor for LIN follower applications
- Wake-up source recognition (local or remote)
- K-line compatible
- Pin-to-pin compatible with TJA1020
- Available in SO8 and HVSON8 packages
- Leadless HVSON8 package (3.0 mm × 3.0 mm) with improved Automated Optical Inspection (AOI) capability
Low Power Management
- Very low current consumption in Sleep mode with local and remote wake-up
Protection Mechanisms
- High ESD robustness: ±6 kV according to IEC 61000-4-2 for pins LIN, VBAT and WAKE_N
- Transmit data (TXD) dominant time-out function
- Bus terminal and battery pin protected against transients in the automotive environment (ISO 7637)
- Bus terminal short-circuit proof to battery and ground
- Thermally protected
Product Longevity Program
- These products are included in the NXP Product Longevity program ensuring a stable supply of products for your embedded designs. The TJA1021A and TJA1021B are included in the 15-year program
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
1-5 of 9 documents
-
Package Information
plastic thermal enhanced very thin small outline package; no leads; 8 terminals
Design Resources
Hardware
Quick reference to our
board types.
1-5 of 10 hardware offerings
-
Complete SolutionGoldBox 3 Vehicle Networking Development Platform
-
Complete SolutionS32G3 Vehicle Networking Reference Design
-
Evaluation and Development BoardsS32K3X4EVB-T172 Evaluation Board for Automotive General Purpose
-
Additional hardware available. View our featured partner solutions.
-
Evaluation and Development BoardsS32K324 Triple Permanent Magnet Synchronous Motor Control (PMSM) Reference Design Board
-
Evaluation and Development BoardsS32K142 BLDC/PMSM Development Board
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
2 engineering services
-
Independent Design House (IDH)
AUTOSAR (CP) Engineering Development Service
-
Independent Design House (IDH)
MCAL and Complex Driver Development Services
To find additional partner offerings that support this product, visit our Partner Marketplace.