-
FRDM-K32L3A6
-
NXP Freedom Development Platform for K32 L3 MCUs.
- One FRDM-K32L3A6 development board
- One USB cable
NXP Freedom Development Platform for K32 L3 MCUs
The FRDM-K32L3A6 development board consists of the K32L3A6 device with a 32-Mbit external serial flash, FXOS8700 accelerometer/magnetometer, visible light sensor, SDHC circuit, general purpose LEDs, and general purpose push buttons in the popular Freedom board form-factor.
Product Details
Block Diagram
Choose a diagram:
Supported Devices
Processors and Microcontrollers
K32 L Series Arm Cortex-M4/M0+
- K32-L3: NXP’s Energy Efficient Cortex-M4 MCU with Cortex-M0+ and Advanced Security
Features
K32L3A60VPJ1A
- 72 MHz Arm® Cortex®-M4 and Cortex-M0
- 1.25 MB Flash
- 384B SRAM
- Secure boot/update capability
Power Management
- Four selectable power sources including USB connector
- DC-DC converter with Buck and Bypass operation modes
- Jumpers and trace cuts enable accurate core current measurements
USB
- Full-speed USB module with device capability and built-in transceiver
Secure Digital Host Controller (SDHC)
- SDHC card slot supported
Serial Flash Memory
- 4 MB serial flash memory with SPI interface
Accelerator + Magnetometer Combo Sensor
- Six-axis accelerometer with integrated magnetometer
Note: Rev C and later will not populate this sensor
Visible Light Sensor
- Phototransistor connected to the ADC input channel for evaluating the ADC
User Application LEDs
- One RGB LED and one red LED controlled by GPIO
OpenSDA serial and debug
- Includes an open-source hardware design, an open-source DAPLink bootloader, and debug CMSIS-DAP interface software and bridges serial and debug communications between USB host and an embedded target processor
Buy Options
Documentation
Quick reference to our documentation types.
4 documents
-
User Guide
Get Started with the FRDM-K32L3A6Getting Started
-
User Guide
FRDM-K32L3A6 User's GuideGetting Started
-
Application Note
Dual-core Project Creation and Conversion for K32L3A6 Devices
-
Errata
FRDM-K32L3A6 Errata
Design Resources
Design Files
Quick reference to our
design files types.
2 design files
-
Printed Circuit Boards and Schematics
FRDM-K32L3A6 Schematics
-
Printed Circuit Boards and Schematics
FRDM-K32L3A6 Design Files
Software
Quick reference to our software types.
3 software files
-
Debugging and Visualization Tools
LinkServer for Microcontrollers
-
Debugging and Visualization Tools
FreeMASTER tool 3.2 (includes Lite 1.3) – Windows installerupdated
-
Development IDEs and Build Tools
MCUXpresso Integrated Development Environment (IDE)
Note: For better experience, software downloads are recommended on desktop.