Freedom Development Platform for Kinetis® KV3x Family MCUs

FRDM-KV31F Active

Roll over image to zoom in

The FRDM-KV31F is a low-cost development tool for the Kinetis® V series KV3x MCU family built on the Arm® Cortex®-M4 processor. The FRDM-KV31F hardware is form-factor compatible with the Arduino® Rev3 pin layout, providing a broad range of expansion board options, including FRDM-MC-LVPMSM and FRDM-MC-LVBLDC for permanent magnet and brushless DC motor control.

The FRDM-KV31F platform features OpenSDA, the NXP® open source hardware embedded serial and debug adapter running an open source bootloader. This circuit offers several options for serial communication, flash programming, and run-control debugging. The FRDM-KV31F is supported by a range of NXP and third-party development software.

Supported Devices

Processors and Microcontrollers

KV Series Arm Cortex-M4/M0+/M7

  • KV3x: Kinetis® KV3x-100–120 MHz,  Advanced 3ph FOC / Sensorless Motor Control MCUs based on Arm® Cortex®-M4

Features

Microcontroller

    KV31F512VLL12 MCU

  • Arm® Cortex®-M4 120 MHz
  • 512 kB flash, 96 kB SRAM
  • 2x 16-bit ADCs
  • 4x FlexTimers/PWM up to 20-ch. with quadrature decoder dedicated to motor and power control and 2x 12-bit DACs
  • 100 LQFP

Connectivity

  • Motor control auxiliary connector
  • Form factor compatible with Arduino® Rev3 pin layout

Power Management

  • Power selectable 3.3 V/1.8 V
  • Flexible power supply options – USB or external source

Debug

    New, OpenSDA debug interface

  • Mass storage device flash programming interface (default) – no tool installation required to evaluate demo apps
  • MBED Debug interface provides run-control debugging and compatibility with IDE tools
  • CMSIS-DAP interface: new Arm® standard for embedded debug interface

Sensors

  • Six-axis sensor combining accelerometer and magnetometer (FXOS8700CQ)
  • Thermistor sensor to measuring temperature

User components

  • Tri-color user-controllerable LEDs
  • Two (2) user push-button switches for NMI interrupts and LLWU wake-up (SW2/SW3)

Buy Options

FRDM-KV31F-Image

Click to expand

  • FRDM-KV31F
    Active

  • Freedom Development Board for Kinetis KV30 and KV31 MCUs.

    • FRDM-KV31F Freedom Development Platform
    • Quick Reference Card
    • USB A-to-MicroB cable
  • $45.99 USD
  • For a quantity of 1
    • Availability: In Stock
    • Inventory: 1
    • Shipping: Normally ships 1-2 business days
ADD TO CART
Order from distributors

Documentation

Quick reference to our documentation types.

Filters

1-5 of 18 documents

Show All

Related Hardware

Quick reference to our board types.
Filters

4 hardware offerings

Design Files

Quick reference to our design files types.
Filters

2 design files

Software

Quick reference to our software types.

Filters

1-5 of 7 software files

Show All

Note: For better experience, software downloads are recommended on desktop.