Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
8-bit EEPROM with LIN S08EL and S08SL MCUs
S08EL and S08SL 8-bit microcontrollers (MCUs) with embedded follower LIN interface controller (SLIC) and EEPROM help to increase LIN follower performance and reduce development time. NXP®.s 8-bit EL and SL families of MCUs are designed for LIN follower and general market applications. The EL family is positioned as higher-end, offering higher memory and more peripherals, while the SL family is intended for more cost-sensitive applications.
One application focus area of the EL and SL families is Local Interconnect Network (LIN). LIN is a UART-based, single-leader multiple-follower networking architecture originally developed for automotive sensor and actuator networking applications.
Product Details
Block Diagram
Features
8-Bit HCS08 Central Processing Unit (CPU)
- Up to 20 MHz internal bus (40 MHz HCS08 Core) frequency offering 2.7 to 5.5V across temperature range of -40°C to 85°C
On-Chip Memory
- Up to 32K flash read/program/erase over full operating voltage and temperature
- Up to 512 Bytes EEPROM
Power Saving Modes
- Two very low-power stop modes
- Reduced power wait mode
- Very low-power real-time interrupt for use in run, wait, and stop
Clock Source Options
- Oscillator (XOSC) — Loop-control Pierce oscillator; Crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz
- Internal Clock Source (ICS) — FLL modes; Internal reference clock with trim adjustment
Periperals
- Follower LIN interface controller (SLIC)— Supports LIN 2.0 and SAE J2602 protocols; up to 120 kbps, full LIN message buffering, automatic bit rate and frame synchronization, checksum generation and verification, UART-like byte transfer mode
- Analog to digital converter (ADC)—Up to 16-channel, 10-bit resolution
- Serial communications interface (SCI) —with LIN 2.0 Protocol and SAE J2602 compliance; Leader extended break generation; Follower extended break detection; LIN follower supplement on SCI1; Automatic baud rate correction; Message time-out detection
- RTC—(Real-time counter) 8-bit modulus counter with binary or decimal based prescaler; External clock source for precise time base, time-of-day calendar or task scheduling functions; Free running on-chip low power oscillator (1 kHz) for cyclic wake-up wit
Input/Output
- 16 interrupt pins with selectable polarity
- 22 general purpose input/output (GPIO)s
System Protection
- Low-voltage detection with reset or interrupt; selectable trip points
- Flash block protection
- EEPROM block protect
Hardware Development Support
- Single-wire background debug interface
- On-chip in-circuit emulator (ICE) debug with real time bus capture
Product Longevity Program
- This product is included in NXP product longevity program, with assured supply for a minimum of 15 years after launch
Part numbers include: MC9S08SL16CTL, MC9S08SL8CTJ, MC9S08SL8CTL, MC9S08SL8MTJ, MC9S08SL8VTJ, S9S08SL16F1CTJ, S9S08SL16F1CTL, S9S08SL16F1MTJ, S9S08SL16F1MTL, S9S08SL16F1VTL, S9S08SL8F1CTJ, S9S08SL8F1MTJ, S9S08SL8F1MTL, S9S08SL8F1VTJ.
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
1-5 of 39 documents
-
Data Sheet
Data Sheet for MC9S08SL16 and MC9S08EL32 Series MCUsFeatured
-
Reference Manual
HCS08 Family Reference ManualFeatured
-
Fact Sheet
S08EL and SL 8-bit I and MM Microcontrollers FactsheetFeatured
-
Data Sheet
Addendum to MC9S08EL32 Series Data SheetFeatured
Design Resources
Hardware
Quick reference to our
board types.
5 hardware offerings
-
Emulators, Probes, and ProgrammersUniversal Multilink Development InterfaceFeatured
-
Evaluation and Development BoardsS08EL/SL Demonstration BoardFeatured
-
Emulators, Probes, and ProgrammersPEmicro Cyclone programmer
-
Emulators, Probes, and ProgrammersPEmicro Cyclone FX programmer
-
Emulators, Probes, and ProgrammersUniversal Multilink FX High-Speed Development Interface
Software
Quick reference to our software types.
1-5 of 10 software files
-
Development IDEs and Build Tools
CodeWarrior® for Microcontrollers (Classic IDE) - RS08/HC(S)08, ColdFire V1 v6.3Featured
-
Development IDEs and Build Tools
CodeWarrior® for MCUs (Eclipse IDE) - ColdFire®, 56800/E DSC, Qorivva® 56xx, RS08/S08, S12Z - 11.1Featured
-
Configuration Tools
Processor Expert® Software – Component Development Environment v1.0.4
-
Additional software available. View our featured partner solutions.
-
Configuration Tools
Embedded Component: NXPAnalogComp
-
BSPs and Device Drivers
Graphical LCD Driver for MCUs/MPUs
Note: For better experience, software downloads are recommended on desktop.
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
2 engineering services
-
Independent Design House (IDH)
Hardware/Software Engineering Services
-
Independent Design House (IDH)
Hardware/Software development and testing
.svg)
To find additional partner offerings that support this product, visit our Partner Marketplace.