8-bit EEPROM Emulation LJ and LK MCUs
Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
8-bit LCD for Battery-Powered and Handheld LC MCUs
The S08LC microcontroller expands Our 8-bit portfolio by offering an integrated LCD controller with the low-power and feature-rich capabilities of the S08 family. It is the first LCD S08 8-bit microcontroller for battery-powered and handheld applications. The S08LC is a flash-based device with enhanced EEPROM emulation, eliminating the need for off-chip EEPROM, saving both board space and cost.
The S08LC is specifically crafted to provide high segment count that is easy on the batteries. A larger segment display of up to 160 segments offers total flexibility with a graphical display and sufficient memory to act as application and LCD controller without the added cost of a dot matrix or chip-on-glass,? fulfilling the need for a broad spectrum of applications with displays.
Product Details
Features
S08 Central Processor Unit (CPU)
- 40 MHz (20 MHz bus) at >2.1V operation for 50 ns minimum instruction time
- 16 MHz (8 MHz bus) frequency at <2.1V
LCD Driver and Internal Charge Pump
- Integrated LCD driver supports both standard 3V and 5V LCD glass
- Configurable display for 4 x 40 or 3 x 41segment display
- Automatic blink and refresh
- Internal charge pump
- Capable of running in STOP3 mode
Flash Memory
- In-application re-programmability
- Dual flash block for enhanced EEPROM emulation
Clock Source Options
- Internal clock generator (ICG)
- frequency-locked loop (FLL)
- controlled by internal or external reference
Serial Communication Ports
- Serial communications interface (SCI) module offering asynchronous communications
- Serial peripheral interface (SPI) module
- Full-duplex, 3-wire synchronous transfer
- Maximum bit rate of 5 MHz for 10 MHz bus frequency
- Inter-integrated Circuit (I²C) bus module
- 2-wire synchronous serial module to connect to standard I²C bus
- Designed to operate up to 100 kbps with maximum bus loading and timing
Keyboard Interrupts (KBI) and I/O
- Up to 16 KBI with software selectable polarity on edge or edge/level modes
Analog Integration
- 8-channel, 12-bit ADC
- Automatic compare function, software programmable for greater than, equal to or less than conditions
- Temperature sensor
- Internal bandgap reference channel
- Trigger conversion using the real-time interrupt (RTI) counter
- Analog comparator module
- Option to compare to internal reference
- Output can be optionally routed to timer / pulse width modulation module (TPM) as input capture trigger
Timers
- Programmable 16-bit TPM
- Each channel can be independentlyprogrammed for:
- Input capture
- Output compare
- Buffered, edge-aligned pulse width modulation (PWM)
- Buffered center-aligned PWM
System Security Features
- Watchdog computer operating properly reset with option to run from dedicated 1 kHz internal clock source or from bus clock
- Low-voltage detection (LVD) generates reset, interrupt or flag with two software selectable trip points
- Low-voltage warning sets flag, with higher trip points than LVD
Related products
Buy/Parametrics
| | | | | |
|---|---|---|---|---|---|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
Documentation
Quick reference to our documentation types.
1-10 of 28 documents
Compact List
Application Note (11)
-
M68HC08 to HCS08 Transition[AN2717]
1-10 of 28 documents
Compact List
Application Note (11)
-
M68HC08 to HCS08 Transition[AN2717]
Application Note Software (2)
-
Software Accompanying AN3405[AN3405SW]
-
Software to Accompany AN3280[AN3280SW1]
Data Sheet (1)
-
MC9S08LC60, MC9S08LC36 - Data Sheet[MC9S08LC60]Featured
Errata (2)
-
Mask Set Errata: 0M78B - Errata[MSE9S08LC60_0M78B]
-
Mask Set Errata: 1M78B - Errata[MSE9S08LC60_1M78B]
Fact Sheet (1)
-
MC9S08LC Family Fact Sheet[MC9S08LC60FS]Featured
Product Change Notice (1)
Reference Manual (1)
-
HCS08 Family Reference Manual[HCS08RMV1]
Reliability and Quality Information (3)
-
VDE IEC 60730 Class B test report for the MC9S08 MCU[VDE_S08_CLASSB_TEST_REPORT]
-
Tuev IEC 60730 SRAM test certificate for MC9S08 controller[TUEVCERTIFICATIONWALKPATRAM]
-
Tuev IEC 60730 CPU test certificate for MC9S08 controller[TUEVCPUCLASSCCERT]
Technical Notes (2)
User Guide (2)
White Paper (2)
Design Resources
Hardware
Quick reference to our
board types.
4 hardware offerings
-
Emulators, Probes, and ProgrammersUniversal Multilink Development InterfaceFeatured
-
Emulators, Probes, and ProgrammersPEmicro Cyclone programmer
-
Emulators, Probes, and ProgrammersPEmicro Cyclone FX programmer
-
Additional hardware available. View our featured partner solutions.
-
Emulators, Probes, and ProgrammersUniversal Multilink FX High-Speed Development Interface
Software
Quick reference to our software types.
1-5 of 11 software files
-
BSPs and Device Drivers
Graphical LCD Driver for MCUs/MPUsFeatured
-
Development IDEs and Build Tools
CodeWarrior® for Microcontrollers (Classic IDE) - RS08/HC(S)08, ColdFire V1 v6.3Featured
-
Development IDEs and Build Tools
CodeWarrior® for MCUs (Eclipse IDE) - ColdFire®, 56800/E DSC, Qorivva® 56xx, RS08/S08, S12Z - 11.1Featured
-
Additional software available. View our featured partner solutions.
-
Configuration Tools
Processor Expert® Software – Component Development Environment v1.0.4
-
Configuration Tools
Embedded Component: NXPAnalogComp
Note: For better experience, software downloads are recommended on desktop.
.svg?imwidth=300){kind=logo}
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
3 engineering services
-
Independent Design House (IDH)
Embedded firmware consulting
-
Independent Design House (IDH)
Hardware/Software development and testing
.svg)
-
Independent Design House (IDH)
EMI/EMC Assessment and compliance
To find additional partner offerings that support this product, visit our Partner Marketplace.
