Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
H-Bridge, Brushed DC Motor Driver, 5-28 V, 5 A, 11 kHz
The NXP® MC33931 is a monolithic H-Bridge power IC in a robust thermally enhanced package, designed primarily for automotive electronic throttle control, but is applicable to any low-voltage DC servo motor control application within the current and voltage limits stated in this specification.
- The MC33931 H-bridge is able to control inductive loads with currents up to 5.0 A peak
- RMS current capability is subject to the degree of heatsinking provided to the device package. Internal peak-current limiting (regulation) is activated at load currents above 6.5 A ±1.5 A
- Output loads can be pulse-width modulated at frequencies up to 11 kHz
- Processor Expert® component for medium voltage H-Bridge products enables rapid embedded application development.
Product Details
Block Diagram
Features
Key Features
- 8.0 V to 28 V continuous operation (transient operation from 5.0 V to 40 V)
- 235mΩ maximum RDS(ON) @ Tj=150°C (each H-Bridge MOSFET)
- 3.0 V and 5.0 V TTL / CMOS logic compatible inputs
- Over-current limiting (regulation) via internal constant-off-time PWM
- Output short-circuit protection (short to VPWR or GND)
- Temperature-dependant current-limit threshold reduction
- All inputs have an internal source/sink to define the default (floating input) states
- Sleep mode with current draw < 50μ A (each half with inputs floating or set to match default logic states)
Product Longevity Program
- This product is included in the NXP Product Longevity Program ensuring a stable supply of products for your embedded designs. The MC33931 is included in the 15-year program
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
1-5 of 7 documents
-
Application Note
AN2388, Heatsink Smal Outline Package (HSOP)Featured
-
Data Sheet
MC33931, 5.0 A Throttle Control H-Bridge - Data SheetFeatured
-
Application Note
AN3670, Implementing a DSI Network Using the MC33781 and the MC33784
Design Resources
Hardware
Quick reference to our
board types.
4 hardware offerings
-
Evaluation and Development BoardsEvaluation Kit - MC33932EK, Dual 5 A Throttle ControlFeatured
-
Evaluation and Development BoardsEvaluation Kit for 33932, Dual 5 A Throttle ControlFeatured
-
Evaluation and Development BoardsFreedom Expansion board for MC33931- Brushed DC Motor Driver, H-Bridge, 11 kHz
-
Evaluation and Development BoardsTower® Expansion Board - MC33932 and MC33926, Dual and Single H-Bridg
Software
Quick reference to our software types.
2 software files
-
Configuration Tools
Embedded Component: Medium Voltage H-Bridge
-
Configuration Tools
Embedded SW: Medium Voltage H-Bridge Software Driver
Note: For better experience, software downloads are recommended on desktop.
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
2 engineering services
-
Independent Design House (IDH)
Hardware/Software Engineering Services
-
Independent Design House (IDH)
Hardware/Software Engineering Services
To find additional partner offerings that support this product, visit our Partner Marketplace.