MC34GD3000EP Product Information|NXP

Features


Brushless DC Motor Gate Driver, 3-Phase, 5-60V, 1A, QFN 56

Package


HVQFN56: HVQFN56, plastic, thermal enhanced very thin quad flatpack; no leads; 56 terminals; 0.5 mm pitch; 8 mm x 8 mm x 0.9 mm body

Buy Options

MC34GD3000EP

Active

12NC: 935313159557

Details

MC34GD3000EPR2

Active

12NC: 935313159528

Details

Operating Features

ParameterValue
Device Function
3 phase, gate driver
Load Current (IL) [TYP] (A)
2
Number of Channels
6
Drain-to-Source On Resistance (TYP) (Ohm) (RDS(ON))
5.5
Full-bridge RDS(on) (Typ) (Ohm)
0
Load Supply Voltage (Min) (V)
6
ParameterValue
Load Supply Voltage (Max) (V)
60
Supply Voltage [min] (V)
8
Supply Voltage [max] (V)
40
Interface and Input Control
Parallel / Parallel, SPI / SPI
Ambient Operating Temperature (Min to Max) (℃)
-20 to 105

Environmental

Part/12NCPbFreeEU RoHSHalogen FreeRHF IndicatorREACH SVHCWeight (mg)
MC34GD3000EP(935313159557)
Yes
Yes
Certificate Of Analysis (CoA)
Yes
DREACH SVHC
0.001
MC34GD3000EPR2(935313159528)
Yes
Yes
Certificate Of Analysis (CoA)
Yes
DREACH SVHC
0.001

Quality

Part/12NCSafe Assure Functional SafetyMoisture Sensitivity Level (MSL)Peak Package Body Temperature (PPT) (C°)Maximum Time at Peak Temperatures (s)
Lead Free SolderingLead Free SolderingLead Free Soldering
MC34GD3000EP
(935313159557)
No
3
260
40
MC34GD3000EPR2
(935313159528)
No
3
260
40

Shipping

Part/12NCHarmonized Tariff (US)Disclaimer
MC34GD3000EP
(935313159557)
854239
MC34GD3000EPR2
(935313159528)
854239

Product Change Notice

Part/12NCIssue DateEffective DatePCNTitle
MC34GD3000EP
(935313159557)
2020-12-152020-12-16202011011INXP Will Add a Sealed Date to the Product Label
MC34GD3000EPR2
(935313159528)
MC34GD3000EP
(935313159557)
2017-12-202018-01-03201710023INew PQ Label Input for Non-MPQ Shipments
MC34GD3000EPR2
(935313159528)

More about GD3000

The GD3000 is a gate driver IC for three-phase motor drive applications providing three half-bridge drivers, each capable of driving two N-channel MOSFETs.

  • Supports 1 A to 2.5 A peak current capability
  • Can operate off of a single power supply with a wide range from 6 V to 60 V with 75 V transient protection
  • Uses a bootstrap gate driver architecture with trickle charge circuitry to support 100% duty cycle
  • Uses programmable cross-talk protection when the high-side or low-side MOSFET is switching to prevent flow of current
  • Integrated VDS sensing of the high-side and low-side MOSFETs is used to protect the external power stage against over-current conditions
  • Includes a current shunt amplifier for accurate current measurement for phase error detection

The IC interfaces to a MCU via six direct input control signals, a SPI port for device setup and asynchronous reset, enable and interrupt signals. Both 5.0 and 3.0 V logic level inputs are accepted and 5.0 V logic level outputs are provided.

More