MPC563xM|32-bit MCU|Powertrain

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The MPC563xM MCU offers enhanced powertrain functionality for entry-level automotive and industrial applications. It also addresses the aggressive cost constraints of engine and transmission suppliers focused on emerging markets.

Supports engines up to four cylinders
Enables strict but affordable emission control and allows a three to five percent improvement of economy and power
Easy to assemble and inspect (infrared and X-ray technology not required)
Helps reduce costs through single linear power supply

Data Sheet

Reference Manual

Product Details

Block Diagram

MPC563XM Microcontroller Block Diagram

Get diagram PDF

Features

General

40, 60 and 80 MHz options Power Architecture^®> e200z3 Core
Up to 1.5 MB flash with error correcting codes (ECC)
111 KB total SRAM
Variable gain amplifier
Decimation filter
This product is included in NXP product longevity program, with assured supply for a minimum of 10 years after launch

Timed I/O channels

32-channel eTPU2
16-channel eMIOS with unified channels

On-chip Emissions Control

Enables lower CO2 emissions by three to five percent for same amount of fuel
Allows fast development of “clean sheet” solutions to meet emissions legislation
Brings three to five percent improvement of economy and power via affordable emissions controls
No active external components required for on-chip knock system because of variable on-chip gain and sensor bias

Part numbers include: SPC5633MF1MLQ40, SPC5633MF1MLQ60, SPC5633MF1MLQ80, SPC5633MF2MLQ60, SPC5633MF2MLQ80, SPC5633MF2MLU60, SPC5633MF2MLU80, SPC5634MF1MLQ60, SPC5634MF1MLQ80, SPC5634MF1MLU60, SPC5634MF1MLU80, SPC5634MF2MLQ60, SPC5634MF2MLQ80, SPC5634MF2MLU80, SPC5634MF2MMG80.

MPC563xM Family Comparison Table

Product	Frequency	Flash	RAM	eTPU2	eMIOS	ADC	Package
MPC5634M	60 MHz, 80 MHz	1.5M	94	1x32ch	1x16ch	34ch dual 12-bit	144LQFP, 176LQFP, 208MAPBGA
MPC5633M	40 MHz, 60 MHz, 80 MHz	1M	64	1x32ch	1x16ch	32ch dual 12-bit	144LQFP, 176LQFP, 208MAPBGA
MPC5632M	40 MHz, 60 MHz	768K	48	1x32ch	1x8ch	32ch dual 12-bit	144LQFP

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Design Resources

Design Files

Quick reference to our design files types.

1 design file

Receive the full breakdown. See the product footprint and more in the eCad file.

^Calculators
MPC56xx EEPROM Emulation Endurance Calculator

ZIPRev vBeta053Dec 17, 2012 00:00:009.1 MBMPC56XX_EEPROM_CALCULATOR
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Hardware

Quick reference to our board types.

1-5 of 15 hardware offerings

^{Evaluation and Development Boards}
MPC563xM Engine Management Evaluation SystemFeatured

XPC563MKIT
^{Evaluation and Development Boards}
Evaluation Kit - MC33903BD5, SBC Gen2 with CAN and LINFeatured

KIT33903BD5EVBE
^{Evaluation and Development Boards}
Evaluation Kit for 33905D3 System Basis Chip Gen2 with CAN and LINFeatured

KIT33905BD3EVBE
Additional hardware available. View our featured partner solutions.
^{Evaluation and Development Boards}
MPC56xx shieldFeatured

XPC56xxMB2
^{Evaluation and Development Boards}
Evaluation Kit - 33905D5, SBC Gen2 with CAN and LINFeatured

KIT33905D5EKEVBE
^{Evaluation and Development Boards}
Evaluation Kit - MC33903BD3, SBC Gen2 with CAN and LINFeatured

KIT33903BD3EVBE
^{Adapters, Cables, Sockets}
MPC55xx Debug and Target Adapters

MPC55xxADAPTERS
^{Emulators, Probes, and Programmers}
Universal Multilink Development Interface

UMultilink
^{Emulators, Probes, and Programmers}
Universal Multilink FX High-Speed Development Interface

U-MULTILINK-FX
^{Emulators, Probes, and Programmers}
PEmicro Cyclone programmer

CYCLONE
^{Emulators, Probes, and Programmers}
PEmicro Cyclone FX programmer

CYCLONE-FX
^{Evaluation and Development Boards}
MPC563xM StarterTRAK Development Kit

TRK-MPC5634M
^{Evaluation and Development Boards}
MPC563xM Device and Target Adapters

MPC563xMVBBOARDS
^{Evaluation and Development Boards}
MPC5646C Devlce and Target Adapters

MPC5646C-DB
^{Evaluation and Development Boards}
MPC56xxDevice and Target Adapters

MPC56xxVXBOARDS

Show All

5 hardware offerings

^{Test Accessories and Debugger}
Cyclone Production Programmers

Programmer for stand-alone (or cloud-connected) in-circuit flash programming, debug, & test of many NXP MCUs. Sophisticated power mgmt and dyanmic data. FX line o...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
TRACE32® PowerTrace System for NXP Microcontrollers/Microprocessors

PowerTrace system provides full insights of what an embedded system is doing without impacting its real-time performance. It ensures bringing designs to market faster and...

By Lauterbach GmbH Gold Partner
^{Test Accessories and Debugger}
Multilink Debug Probes

Multilink debug probes are BDM/JTAG debug probes for various NXP devices. Universal models support SWO debug in NXP's MCUXpresso IDE. FX model features high-speed com...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
TRACE32® Debug and Trace tools for PowerPC-based NXP Microcontroller

TRACE32® provides a complete suite of tools for NXP's PowerPC-based Microcontrollers. They provide unparalleled levels of debug capabilities to get the best out of PowerP...

By Lauterbach GmbH Gold Partner
^{Test Accessories and Debugger}
TRACE32® PowerDebug System for NXP Microcontrollers/Microprocessors

PowerDebug is Lauterbach's powerful, modular, flexible debug system. It provides the broadest coverage of supported chips and core architectures in the embedded industry ...

By Lauterbach GmbH Gold Partner