LPC4310FET100|Arm Cortex-M4/M0|32-bit MCU

LPC4310FET100|Arm Cortex-M4/M0|32-bit MCU | NXP Semiconductors

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The LPC4310FET100 is an Arm^® Cortex-M4 based digital signal controller with an Arm Cortex-M0 coprocessor designed for embedded applications requiring signal processing. The Arm Cortex-M4 core offers single-cycle Multiply-Accumulate and SIMD instructions and a hardware floating-point unit to support signal processing while the M0 coprocessor handles I/O and digital control processing. The LPC4310FET100 includes 168 kB of data memory, advanced configurable peripherals such as the State Configurable Timer (SCT), Serial General Purpose I/O (SGPIO), and SPI Flash Interface (SPIFI) as well as an external memory controller and multiple digital and analog peripherals.

See product image

Data Sheet

Application Notes

Product Details

Features

Arm Cortex-M4 processor, running at frequencies of up to 204 MHz
Arm Cortex-M4 built-in Memory Protection Unit (MPU) supporting eight regions
Arm Cortex-M4 built-in Nested Vectored Interrupt Controller (NVIC)
Hardware floating-point unit
Non-maskable Interrupt (NMI) input
JTAG and Serial Wire Debug (SWD)
System tick timer
Arm Cortex-M0 co-processor running at frequencies of up to 204 MHz
168 kB SRAM for code and data use
Two 32 kB SRAM blocks with separate bus access
32 kB ROM containing boot code and on-chip software drivers
32 bit One-Time Programmable (OTP) memory for customer use
Serial GPIO (SGPIO) interface
State Configurable Timer (SCT) subsystem on AHB
Quad SPI Flash Interface (SPIFI) with four lanes and up to 40 MB per second
One 550 UART with DMA support and full modem interface
Three 550 USARTs with DMA and synchronous mode support
One C_CAN 2.0B controller with one channel
Two SSP controllers with FIFO and multi-protocol support
One SPI controller
One Fast-mode Plus I2C-bus interface with rates of up to 1 Mbit/s
One Fast-mode I2C-bus interface
Two I2S interfaces
External Memory Controller (EMC) supporting external SRAM, ROM, flash, SDRAM
Secure Digital Input Output (SDIO) card interface
Eight-channel General-Purpose DMA (GPDMA) controller
Up to 49 General-Purpose Input/Output (GPIO) pins
Four general-purpose timer/counters with capture and match capabilities
One motor control Pulse Width Modulator (PWM) for three-phase motor control
One Quadrature Encoder Interface (QEI)
Repetitive Interrupt timer (RI timer)
Windowed watchdog timer (WWDT)
Ultra-low power Real-Time Clock (RTC) on separate power domain
Alarm timer; can be battery powered
One 10-bit DAC with DMA support and a data conversion rate of 400 kSamples/s
Two 10-bit ADCs with DMA support and a data conversion rate of 400 kSamples/s
Two 128-bit secure OTP memories for AES key storage and customer use
Crystal oscillator with an operating range of 1 MHz to 25 MHz
12 MHz Internal RC (IRC) oscillator trimmed to 1 % accuracy
Ultra-low power Real-Time Clock (RTC) crystal oscillator
Three PLLs allow CPU operation up to the maximum CPU rate
Clock output
Single 3.3 V (2.2 V to 3.6 V) power supply with on-chip DC-to-DC converter
RTC power domain can be powered separately by a 3 V battery supply
Four reduced power modes
Processor wake-up from Sleep mode via wake-up interrupts
Brownout detect with four separate thresholds for interrupt and forced reset
Power-On Reset (POR)
see selection guide for features per type

Target Applications

Industrial
Consumer
White goods
RFID readers
e-Metering

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Design Resources

Design Files

Quick reference to our design files types.

5 design files

Models
IBIS models for LPC18x0 and LPC43x0 FBD208

ZIPRev 2Mar 25, 2020377.1 KBIBIS_LPC18x0_LPC43x0FBD208
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
BSDL for LPC18xx and LPC43xx

ZIPRev 2Feb 27, 2018269.0 KBBSDL_LPC18XX_43XX

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
BSDL for LPC4350, LPC4330, LPC4320 and LPC4310 pkg BGA256

ZIPRev 1Jun 13, 20177.4 KBBSDL_LPC4350-30-20-10_BGA256

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
LPC43xx/LPC18xx Eagle symbols

ZIPRev 0Jun 3, 201614.9 KBLPC43XX-EAGLE-SYM

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
LPC18XX_43XX_SCH Orcad Symbols

ZIPRev 1.0Apr 30, 201852.2 KBLPC18XX_43XX_SCH_1

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Hardware

Quick reference to our board types.

4 hardware offerings

Emulators, Probes, and Programmers
Universal Multilink Development Interface

UMultilink
Emulators, Probes, and Programmers
PEmicro Cyclone programmer

CYCLONE
Emulators, Probes, and Programmers
PEmicro Cyclone FX programmer

CYCLONE-FX
Additional hardware available. View our featured partner solutions.
Emulators, Probes, and Programmers
Universal Multilink FX High-Speed Development Interface

U-MULTILINK-FX

Shopping cart

Dual-core Cortex®-M4/M0, 168 kB SRAM, CAN, AES, SPIFI, SGPIO, SCT

Product Details

Features

Target Applications

Applications

Automotive

Consumer

Industrial

Buy/Parametrics

Documentation

Filter by

Application Note (21)

Using SGPIO to emulate an SPI leader interface[AN11210]

USBD Library for LPC4300/LPC1800 series MCUs[TN00041]

Connecting TFT LCD with LCD controller of LPC MCU[AN12027]

Inter Processor Communication on LPC43xx[AN11177]

Code Read Protection in LPC1800 and LPC4300[AN11581]

SCT camera interface design with LPC1800 and LPC4300[AN11365]

AES encryption and decryption software on LPC microcontrollers[AN11241]

SDRAM interface to LPC18xx/43xx EMC[AN11508]

LPC1800/LPC4300 One-Time Programmable (OTP) configuration[AN11292]

Using the SCT in LPCXpresso, Keil, and IAR[AN11161]

Wrting a flash programming algorithm for unsupported devices[AN11285]

Using SPIFI on LPC1800 and LPC4300[AN11206]

In-System Programming of LPC18xx/43xx flash[AN11248]

SGPIO on the LPC4300[AN11275]

How to implement the PMBus software stack[AN11318]

Implementing a UART using SGPIO on LPC4300[AN11351]

SGPIO camera module design using LPC4300[AN11343]

LPC4300 camera interface design using SGPIO[AN11196]

Bootmode jumper settings for LPC1800 and LPC4300[AN11239]

UUencoding for UART ISP[AN11229]

PCB layout guidelines for NXP® MCUs in BGA packages[AN10778]

Brochure (4)

NXP® 120 MHz, 32-bit Cortex-M4 DSC LPC407x/LPC408x; Cortex-M4 DSC with FPU, Ethernet, USB, optional LCD, and NXP’s SPIFI[75017336]

NXP® 204 MHz, 32-bit Cortex-M4 /Cortex-M0 DSC LPC4300 series; First asymmetrical, dual-core digital signal controller featuring Cortex-M4 and Cortex-M0[75017216]

First Asymemetrical, dual-core digital signal controller featuring Cortex-M4 and Cortex-M0[LPC4300_1]

First asymmetrical, dual-core digital signal controller featuring Cortex-M4 and Cortex-M0; NXP 150 MHz, 32-bit Cortex-M4 /Cortex-M0 DSC LPC4300 series[75017013]

Data Sheet (1)

32-bit Arm® Cortex®-M4/M0 flashless MCU; up to 264 kB SRAM; Ethernet; two HS USBs; advanced configurable peripherals[LPC4350_30_20_10]

Errata (1)

Errata sheet LPC4370, LPC4350, LPC4330, LPC4320, LPC4310[ES_LPC43X0]

Package Information (1)

plastic thin fine-pitch ball grid array package; 100 balls; body 9 x 9 x 0.7 mm[SOT926-1]

Supporting Information (2)

Connecting a USB power switch to the LPC18xx / LPC43xx[TN00007]

LPC1800 and LPC4300 MxMEMMAP memory map[TN00006]

Training Presentation (1)

Driving LPC1700/LPC1800/LPC4300 with EPSON Crystals[R_10076]

User Guide (1)

LPC43xx/LPC43Sxx Arm® Cortex®-M4/M0 multi-core microcontroller[UM10503]