Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
Package
HVQFN24: plastic thermal enhanced very thin quad flat package; no leads; 24 terminals; body 4 x 4 x 0.85 mm
Buy Options
PCA9548ABS,118
Active
12NC: 935275814118
Details
Quantity
Unit Pricing
| 1 - 24 | $0.99 |
| 25 - 99 | $0.99 |
| 100+ | $0.99 |
Order
In Stock:5,730
Order from distributorsPCA9548ABSHP
Active
12NC: 935275814128
Details
Quantity
Unit Pricing
| 1 - 24 | $1.08 |
| 25 - 99 | $1.08 |
| 100+ | $1.08 |
Order
In Stock:4,490
Order from distributorsOperating Features
| Parameter | Value |
|---|---|
Interrupt | yes |
Operating Temperature (°C) | -40~85 |
Reset input pin | yes |
Operating voltage (VDC) | 2.3~5.5 |
| Parameter | Value |
|---|---|
Inputs | 1 |
Outputs | 8 |
No of Addresses | 8 |
I2C-bus (kHz) | 400 |
Environmental
| Part/12NC | PbFree | EU RoHS | Halogen Free | RHF Indicator | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
PCA9548ABS,118(935275814118) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 35.26 |
PCA9548ABSHP(935275814128) | Yes | Yes Certificate Of Analysis (CoA) | Yes | | REACH SVHC | 35.8529646 |
Quality
| Part/12NC | Safe Assure Functional Safety | Moisture Sensitivity Level (MSL) | Peak Package Body Temperature (PPT) (C°) | FIT | MTBF | IR | ||
|---|---|---|---|---|---|---|---|---|
| Lead Soldering | Lead Free Soldering | Lead Soldering | Lead Free Soldering | |||||
PCA9548ABS,118 (935275814118) | No | 1 | 1 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
PCA9548ABSHP (935275814128) | No | 1 | 1 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
Shipping
| Part/12NC | Harmonized Tariff (US)Disclaimer |
|---|---|
PCA9548ABS,118 (935275814118) | 854239 |
PCA9548ABSHP (935275814128) | 854239 |
More about PCA9548A
The PCA9548A is an octal bidirectional translating switch controlled via the I²C-bus. The SCL/SDA upstream pair fans out to eight downstream pairs, or channels. Any individual SCx/SDx channel or combination of channels can be selected, determined by the contents of the programmable control register.
An active LOW reset input allows the PCA9548A to recover from a situation where one of the downstream I²C-buses is stuck in a LOW state. Pulling the RESET pin LOW resets the I²C-bus state machine and causes all the channels to be deselected as does the internal Power-on reset function.
The pass gates of the switches are constructed such that the VDD pin can be used to limit the maximum high voltage which will be passed by the PCA9548A. This allows the use of different bus voltages on each pair, so that 1.8 V or 2.5 V or 3.3 V parts can communicate with 5 V parts without any additional protection. External pull-up resistors pull the bus up to the desired voltage level for each channel. All I/O pins are 6 V tolerant.