NXP HoverGames Drone Kit Including Flight Controller and Peripherals

KIT-HGDRONEK66 Active

Roll over image to zoom in

The KIT-HGDRONEK66 kit provides the mechanical and other components needed to evaluate the RDDRONE-FMUK66 and adds BLDC motor control capabilities and a mechanical platform, which it can be mounted on. This developer kit may be used as part of, and contains the components needed for the HoverGames coding challenges. It should be noted that this is a professional developer kit, not a complete functional system and includes no software. The flight management unit (FMU) is supported by the business-friendly open source PX4.org flight stack. In addition, a separate suitable hobby-type LiPo battery and country-specific telemetry radio will be required.

When assembled the frame has appropriate additional space in order to mount other components such as an adapter for Rapid IoT, NXP Freedom boards, or a companion computer such as i.MX 8M Mini to be used as a vision processor running Linux and ROS. The HoverGames drone and rover development platform is very flexible, fully open for development of robotics, control algorithms, security networking and communications protocols, and can include another add-on component, companion computer, software, or associated solutions.

Block Diagram

HoverGames drone kit Block Diagram

HoverGames Kit Block Diagram
Get diagram PDF

Supported Devices

Interfaces

3.3 V / 5 V IO CAN Transceivers

  • TJA1042: High-Speed CAN Transceiver with Standby Mode

Automotive Ethernet PHYs

  • TJA1100: TJA1100, IEEE 100BASE-T1 Compliant Automotive Ethernet PHY Transceiver

Processors and Microcontrollers

K6x Ethernet

  • K66_180: Kinetis® K66-180 MHz, Dual High-Speed and Full-speed USBs, 2MB Flash Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core

Sensors

Barometric Pressure 15 to 150 kPa

  • MPL3115A2: Absolute Digital Pressure Sensor (20 to 110 kPa)

Analog and Mixed Signal

Voltage Level Translators

  • NTB0104: Dual-Supply Translating Transceiver (Auto-Direction Sensing, Three-State)

Features

General Features

  • This is a DIY professional development kit and detailed assembly is required
  • May be used to participate in HoverGames.com, or as a robotics development platform

Size

  • Carbon fiber mechanical frame approx. 500 mm diagonal size
  • 150 mm x 150 mm large top and bottom plate for mounting electronics
  • Dual 10mm diameter rod x 60mm rail mounting system

Support and Software

  • No software is provided by NXP. Supported by the open source project PX4
  • Supports expansion using a Linux companion computer for Vision, ROS, Artificial Intelligence
  • Supports connection to Rapid IoT with add-on adapter board

Additional Components

  • Order separately, telemetry radios available as HGD-TELEM433 (EUR) or HGDTELEM-915 (USA) depending on your country regulations

Buy Options

KIT-HGDRONEK66-Image

Click to expand

  • KIT-HGDRONEK66
    Active

  • NXP HoverGames Drone Kit Including Flight Controller and Peripherals.

  • Kit Contains

    HoverGames drone development kit components include:

    • Flight Management Unit: RDDRONE-FMUK66FMU
      • DC-to-DC power module
      • GPS: GPS NEO-M8N module with mount, Safety switch, Buzzer, and bright RGB status LED
      • Debugger: SEGGER J-Link EDU Mini / FTDi USB-TTL-3V3 cable / Debug breakout board with cable
      • Plastic enclosure and sticker
    • BLDC brushless motors 2212 920 kV
    • ESCs motor controllers 40 A OPTO
    • Propellers 9450 self-locking
    • RC remote control: Touchscreen FS-i6S transmitter and FS-iA6B 10 channel RC receiver with IBUS
    • Miscellanous cables, screws, and tools
    • Not included
      • Telemetry radio purchased separately and is dependent on your country regulations, HGD-TELEM433 (EU), or HGD-TELEM915 (USA)
      • Battery and Charger not included, 3S 3500-5000mAh XT60 LiPo
  • $490.00 USD
  • For a quantity of 1
Order from distributors
HGD-TELEM433-Image

Click to expand

  • HGD-TELEM433
    Active

  • Telemetry Radio for HoverGames Drone, 433Mhz (EU) .

  • $78.00 USD
  • For a quantity of 1
    • Availability: In Stock
    • Inventory: 5
    • Shipping: Normally ships 1-2 business days
ADD TO CART
Order from distributors
HGD-TELEM915-Image

Click to expand

  • HGD-TELEM915
    Active

  • Telemetry Radio for HoverGames Drone, 915Mhz (US).

  • $78.00 USD
  • For a quantity of 1
    • Availability: In Stock
    • Inventory: 7
    • Shipping: Normally ships 1-2 business days
ADD TO CART
Order from distributors
MR-HGK-RT-Image

Click to expand

  • MR-HGK-RT
    Active

  • NXP HoverGames Drone Kit Including Flight Controller and Peripherals.

  • HoverGames drone development kit components include:​

    • Flight Management Unit: MR-FMU-RT1176​
      • DC-to-DC power module​
      • GPS: GPS NEO-M8N module with mount, Safety switch, Buzzer, and bright RGB status LED​
      • Debugger: SEGGER J-Link EDU Mini / FTDi USB-TTL-3V3 cable / Debug breakout board with cable​
    • BLDC brushless motors 2212 920 kV​
    • ESCs motor controllers 40 A OPTO​
    • Propellers 9450 self-locking
    • RC remote control: Touchscreen FS-i6S transmitter and FS-iA6B 10 channel RC receiver with IBUS​
    • Miscellanous cables, screws, and tools​

    Not included​

    • Telemetry radio purchased separately and is dependent on your country regulations, HGD-TELEM433 (EU), or HGD-TELEM915 (USA)​
    • Battery and Charger not included, 3S 3500-5000mAh XT60 LiPo​
  • $895.00 USD
  • For a quantity of 1
    • Availability: In Stock
    • Inventory: 3
    • Shipping: Normally ships 1-2 business days
ADD TO CART
Order from distributors

Documentation

Quick reference to our documentation types.

Filters

1 documents

Design Files

Quick reference to our design files types.
Filters

3 design files

Software

Quick reference to our software types.

Filters

1 software file

Note: For better experience, software downloads are recommended on desktop.

Training

Filters

1 trainings