-
MIMXRT1060-EVKB
-
i.MX RT1060 Evaluation Kit.
Kit contains
- MIMXRT1060-EVKB board
EasyEVSE EV Charging Development Platform (MCU, FreeRTOS, Wi-Fi 4)
The cloud-connected EasyEVSE EV charging station development platform provides hardware configuration instructions and example software to quickly set up a secure connection between a simulated electric vehicle supply equipment (EVSE) and a cloud-based application. Use the modular, scalable platform as the foundation to start building differentiated EVSE systems that support device-to-cloud and cloud-to-device communications, accurate energy billing and one-tap NFC authentication.
- Integrate power line communication between the EVSE and EV with the NXP EasyEVSE EV Charging Signal Board to drive the ISO 15118 protocol
- Connect to the cloud over Ethernet or Wi-Fi via the IW416 SoC
- Authenticate cloud services such as Microsoft Azure IoT central service
- Enhance security with an EdgeLock™ SE050 secure element
- Support accurate energy billing with a precertified Kinetis M metrology MCU
- Authenticate with one tap using the CLRC663 high-performance NFC frontend
- Leverage NXP and partner development tools to implement other differentiating features on the same platform
Product Details
Features
Hardware
- Modular and scalable development board options can be ordered from the Products Table to support the required functions
Software
- Complimentary example software is downloadable at the link below, targeting:
- i.MX RT106x Crossover MCU
- Microsoft FreeRTOS (part of the MCUXpresso SDK)
- ISO 15118 stack
- NXP Wi-Fi stack
- SDIO card driver for the Murata module IW416 SoC (dual-band Wi-Fi 4, Bluetooth 5.2)
- Host library for the EdgeLock® SE050 secure element
- Libraries for the CLRC663 NFC board
- Library for graphical user interface
- Kinetis M metrology MCU
- Software to control the TWR-KM3x metrology board
- EVSE application-specific example software for front-end power socket emulation development
- EdgeLock SE050 secure element
- Software for the OM-SE050ARD-E security board
- EdgeLock SE05x Plug & Trust Middleware
Documentation
- User guide describes how to get the EasyEVSE up and running using a simplified setup
- User manual provides detailed instructions to use the development platform
- Step-by-step video and instruction when you click the Get Started button above
Availability
- Development boards are orderable from the Product Table below
- Wi-Fi boards are orderable from the channels of Wi-Fi partner Murata
Products Table
| Part Number | Board Description | |
|---|---|---|
| Service Processing Board (choose one) |
MIMXRT1060-EVKB | Development kit for i.MX RT1060 Crossover MCU with Arm® Cortex®-M7 core operating up to 600 MHz |
| MIMXRT1064-EVK | Development kit for i.MX RT1064 Crossover MCU with Arm® Cortex®-M7 Core operating up to 600 MHz with 4 MB Flash | |
| Security Board | OM-SE050ARD-E | SE050 Arduino® compatible development kit |
| Metering Board (choose one) |
TWR-KM35Z75M | Tower System development board for Kinetis KM35 metrology MCUs |
| TWR-KM34Z75M | Tower System development board for Kinetis KM14, KM33 and KM34 (75 MHz) metrology MCUs | |
| TWR-KM34Z50M | Tower System Development Board for Kinetis KM14, KM33 and KM34 (50 MHz) metrology MCUs | |
| NFC Board (optional) |
CLEV6630ARD | CLEV6630ARD: NFC frontend CLRC663 plus Arduino® interface board |
| Display Panel | RK043FN66HS-CTG | 4.3" TFT 480*272 pixels LCD Panel with LED backlight and capacitive touch |
| Wi-Fi Module | 1XK M.2 Module | Murata module with NXP IW416 chipset (dual-band Wi-Fi 4, Bluetooth 5.1) |
| Wi-Fi adapter | LBEE0ZZ1WE-uSD-M2 | Murata uSD-M.2 adapter for the Wi-Fi Module |
| EasyEVSE EV Charging Signal Board | EVSE-SIG-BRD2X | Add-on board for several EV charging development platforms. Uses the HomePlug Green PHY for ISO 15118 communications |
Buy Options
-
EVSE-SIG-BRD2X
-
EasyEVSE EV Charging Signal Board.
Kit contains
- EasyEVSE EV Charging Signal Board and power supply
-
MIMXRT1064-EVK
-
i.MX RT1064 Evaluation Kit.
-
OM-SE050ARD-E
-
EdgeLock SE050E Arduino compatible development kit.
EdgeLock® SE050 Development Kit
Kit contains
- EdgeLock SE050 development board
-
TWR-KM35Z75M
-
KM Series Tower System Module for KM35 MCUs.
-
CLEV6630ARD
-
CLEV6630ARD: NFC frontend CLRC663 plus Arduino® interface board.
-
RK043FN66HS-CTG
-
4.3" LCD Panel.
Design Resources
Software
Quick reference to our software types.
4 software files
-
Evaluation Packages
TWRKM3x_EVSE_Vx
-
Evaluation Packages
EasyEVSE Software
-
Evaluation Packages
EasyEVSE_NFC
-
Evaluation Packages
EasyEVSE_Sevenstax
Note: For better experience, software downloads are recommended on desktop.