SuperSpeed USB 3.0 Redriver
Receive the full breakdown. See the product footprint and more in the eCad file.
Compact List
- No Longer Manufactured
- PTN38007
Multiprotocol USB 4 20 Gbps Linear Redriver
- This page contains information on a product that is no longer manufactured (discontinued). Specifications and information herein are available for historical reference only.
PTN38007 is a high-performance USB4 20 Gbps per lane, 4 lane Linear redriver optimized for USB3.2, DisplayPort 1.4 and Thunderbolt3 Alt modes / USB4 applications on either the downstream facing port (DFP) or upstream facing port (UFP) applications.
This device also implements the snooping monitor of the sideband signals from DP mode (AUX) and Thunderbolt3/USB4 mode (LSTX/RX) to optimize the configuration and recognize power saving modes.
The device provides programmable linear equalization, output swing linearity control by pin strapping or I²C control to improve signal integrity and enable channel extension by reducing inter-symbol interference (ISI).
PTN38007 is typically used between the processor and a retimer that faces USB Type-C ports.
PTN38007 is powered from a 1.8 V supply. It is available in a small high performance HWFLGA36 package.
For additional information and sample availability, contact your local Sales Office.
PTN38007 Chip Shot
Product Details
Features
Key Features
- Flexible 20 Gbps USB Type-C linear redriver supports five signaling modes specified in USB Type-C and VESA specifications, see the datasheet for details.
-
Supports Thunderbolt3/ USB4 lane speeds of 10/10.3125/20/20.6 Gbps
- LSTX and LSRX snooping
- I²C register based Flat gain and linearity control
- Peaking gain of +20 dB at 10 GHz
-
Supports USB 3.2 Gen1x1, Gen 1x2, Gen2x1, Gen2x2 (5 Gbps and 10
Gbps)
- I²C register based Flat gain and linearity control
- Peaking gain of +12.1 dB at 5 GHz
-
Supports DisplayPort link rates at 1.62 Gbps (RBR), 2.7 Gbps (HBR),
5.4 Gbps (HBR2), 8.1 Gbps (HBR3) and DP 2.0 UHBR3 targeted - pending
compliance
- DP AUX monitoring during DP link training to control DP channel
- I²C register based Flat gain and linearity control
- Peaking gain of +10.2 dB at 4.05 GHz
- Compliant to DP1.4, Thunderbolt3 and USB4, USB3.2 standard and USB Type-C Alt mode interoperability testing
- Configurable via I²C interface with a configurable address pin
- Integrated termination resistors provide impedance matching on both transmit and receive sides
- Autonomous orientation detection of USB-C connection and its configurable enable control
- Supports maximum voltage limit (Vvoltage_jump) to align to the latest USB3 specification and computing platform capabilities
- RX equalizers on all high-speed inputs to compensate for signal attenuation
- Automatic receiver termination detection in USB 3.2 and USB4 modes
- Good linearity over the frequency band (50 MHz to 10.3 GHz) and voltage dynamic range
- Excellent differential return loss performance
- Flow-through pin-out to ease PCB layout and minimize crosstalk effects
Related products
3.3 V, Two Differential Channel, 2-1 Multiplexer/Demultiplexer Switch
SuperSpeed USB 3.0 Redriver
USB Type-C SuperSpeed Active Switch
Multi-Channel PCIe Gen 4 Linear Equalizer
Buy/Parametrics
1 result
Exclude 1 NRND
Part | CAD Model | Status |
|---|---|---|
No Longer Manufactured |
Documentation
Quick reference to our documentation types.
Design Resources
