H-Bridge Motor Driver, 5-28 V, 5 A, 11 kHz
Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
8-bit General Purpose MP MCUs
The S08MP16 is a cost-effective 8-bit MCU that delivers safe, accurate and inexpensive motor control for a wide range of industrial and automotive applications. An ideal entry-level solution for brushless DC (BLDC) motor applications, it features an 8-channel pulse width modulator (PWM)/flextimer module providing hardware dead-time insertion, analog comparators, programmable gain amplifier and a 12-bit analog-to-digital converter (ADC) with PWM hardware triggering. Also offered is an independently clocked COP and cyclic redundancy check (CRC) engine providing clock failure protection and memory content validation for safety-critical applications implementing IEC60730.
Product Details
Block Diagram
Features
S08 Central Processor Unit (CPU)
- Up to 50 MHz HCS08 CPU @ 2.7–5.5V across a temperature range of -40°C to +105°C
- HCS08 instruction set with added BGND instruction
On-Chip Memory
- Up to 16 KB flash read/program/erase over full operating voltage and temperature range
- Up to 1 KB RAM
- Security circuitry to prevent unauthorized access to RAM and flash contents
Power Saving Modes
- Two low-power Stop modes and reduced power Wait mode
- Peripheral clock gating can disable clocks to unused modules
Peripherals
-
Analog-to-digital converter (ADC)
- 13 channels
- 12-bit resolution
- 2.5 µs conversion time
- Automatic compare function
- 1.7 mV/°C temperature sensor
- Internal bandgap reference channel
- Operation in stop 3 mode
-
1 x 2-ch. FlexTimer + 1 x 6-ch
- Supports up to 51.34 MHz operation
- Selectable input capture
- Output compare
- Edgeor center-aligned PWM
- Dead time insertion
- Fault inputs
- MTIM: simple 8-bit timer with four software-selectable clock sources and a programmable interrupt
-
3 x high-speed analog comparators (HSACMP)
- +ve and -ve inputs
- Separately selectable interrupt on rising and falling comparator output
- Filtering
- Windowing
- HSCMP1 and HSCMP2 outputs can be optionally routed to FTM1 modul
- Runs in stop3
-
Programmable gain amplifier (PGA)
- Differential programmable gain amplifier with programmable gain (x1, x2, x4, x8, x16 or x32)
-
2 x programmable delay blocks (PDB)
- PDB1 synchronizes PWM with samples of ADC
- PDB2 synchronizes PWM with comparing window of analog comparators
- Independently clocked COP and cyclic redundancy check generator
Development Support
- Single-wire background debug interface
- Breakpoint capability
-
ICE debug module
- Three comparators and nine trigger modes
- Eight deep FIFO for storing change-of-flow addresses and event-only data
- Supports both tag and force breakpoints
Product Longevity Program
- This product is included in NXP product longevity program, with assured supply for a minimum of 15 years after launch
Related products
3-Phase Field Effect Transistor Pre-Driver
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
1-5 of 23 documents
-
Data Sheet
MC9S08MP16 Series - Data SheetFeatured
-
Reference Manual
MC9S08MP16 - Reference ManualFeatured
-
Fact Sheet
S08MP16 Automotive Factsheet Featured
-
Reference Manual
Freescale Embedded Software Library S08 API - Reference Manual
Design Resources
Hardware
Quick reference to our
board types.
4 hardware offerings
-
Emulators, Probes, and ProgrammersUniversal Multilink Development Interface
-
Emulators, Probes, and ProgrammersPEmicro Cyclone programmer
-
Emulators, Probes, and ProgrammersPEmicro Cyclone FX programmer
-
Emulators, Probes, and ProgrammersUniversal Multilink FX High-Speed Development Interface
Software
Quick reference to our software types.
1-5 of 12 software files
-
Development IDEs and Build Tools
CodeWarrior® for Microcontrollers (Classic IDE) - RS08/HC(S)08, ColdFire V1 v6.3Featured
-
Development IDEs and Build Tools
CodeWarrior® for MCUs (Eclipse IDE) - ColdFire®, 56800/E DSC, Qorivva® 56xx, RS08/S08, S12Z - 11.1Featured
-
Configuration Tools
Processor Expert® Software – Component Development Environment v1.0.4
-
Additional software available. View our featured partner solutions.
-
Configuration Tools
Embedded Component: NXPAnalogComp
-
BSPs and Device Drivers
LIN2.x and SAE J2602 Stack
Note: For better experience, software downloads are recommended on desktop.
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
2 engineering services
-
Independent Design House (IDH)
Hardware/Software Engineering Services
-
Independent Design House (IDH)
Hardware/Software development and testing
.svg)
To find additional partner offerings that support this product, visit our Partner Marketplace.