Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
5 V, 3.3 V and 2.5 V UART with 16-byte FIFOs
The SC16C550 is a Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 3 Mbit/s. The SC16C55 is pin compatible with the ST16C550, TL16C550 and PC16550 and it will power up to be functionally equivalent to the 16C450. The SC16C550 also provides DMA mode data transfers through FIFO trigger levels and the (TXRDY) and (RXRDY) signals ((TXRDY) and (RXRDY) are not supported in the HVQFN32 package).
On-board status registers provide the user with error indications, operational status and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows on-board diagnostics. The SC16C550 operates at 5 V, 3.3 V and 2.5 V and the Industrial temperature range and is available in plastic HVQFN32, DIP40, PLCC44 and LQFP48 packages.
Outline 3d SOT617-1
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
1-5 of 12 documents
-
Data Sheet
5 V, 3.3 V and 2.5 V UART with 16-byte FIFOs
-
Application Note
Application of UART in GPS navigation system
-
Application Note
UART serial interface through USB evaluation board
-
Application Note
SC16CXXXB baud rate deviation tolerance
-
Application Note
AN10319
Design Resources
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
2 engineering services
-
Independent Design House (IDH)
Hardware Design Services
-
Independent Design House (IDH)
Embedded Software Design
To find additional partner offerings that support this product, visit our Partner Marketplace.