Design Files
Quick reference to our
design files types.
1 design file
-
Printed Circuit Boards and Schematics
KIT07XS6517GRBR: Gerber files for the KIT07XS6517EVB Evaluation boards
Evaluation Kit - MC07XS6517, Triple High Side Switch
NXP’s KIT07XS6517EVB is a hardware tool for evaluation and development. This evaluation board can be used to evaluate the MC07XS6517 which is a 12 V penta high-side device that features integrated control with high flexibility, and a high number of protection and diagnostic functions.
This device is designed for low-voltage automotive lighting applications and can drive a wide range of sources, including HIB ballasts and LEDs. Programming, control and diagnostics are accomplished using a 16-bit SPI interface, which makes possible a large array of configurations, diagnostics and protection features.
Product Details
Supported Devices
Power Management
High Side Switches
- MC12XS6: External Automotive Lighting Multi-Channel eXtreme Switch
Features
Microcontroller
- Triple 7.0 mOhm and dual 17 mOhm high side switches with high transient current capability
- 16-bit 5.0 MHz SPI control of overcurrent profiles, channel control including PWM duty-cycles, output-ON and -OFF OpenLoad detections, thermal shut-down and prewarning, and fault reporting
- Output current monitoring with programmable synchronization signal and battery voltage feedback
- Limp Home mode
- External smart power switch control
- 6.0 to 28 V operating voltage
- -16 V reverse polarity and ground disconnect protections
- Compatible PCB foot print and SPI software driver among the family
MC07XS6517 features:
Evaluation module features
- This evaluation board consists of an MC07XS6517 IC in a 54-pin SOICW-EP with exposed pads
- This board can control
- Five separate 28 W bulbs
- Three separate 55 W HID ballasts
- Five separate LED modules
- Five separate loads of other types
- Device can be driven by the 16-bit SPI using KITUSBSPI with SPIGen software or with direct input signals in Fail-safe mode operation. It also offers the possibility to apply an external clock in order to drive outputs in PWM operation
Documentation
Quick reference to our documentation types.
1-5 of 6 documents
-
Data Sheet
MC07XS6517, Triple 7.0 mOhm and Dual 17 mOhm High-side Switch - Data sheetFeatured
-
User Guide
KTXSWITCH4UG, eXtreme Switch Gen4 Evaluation Board - User’s GuideFeatured
-
User Guide
KT12XS6UG, MC12XS6 Evaluation Boards - User GuideFeatured
-
User Guide
KTSPIGENSIUG, Installation Notes for SPIGenGetting Started
-
User Guide
KTSPIGENHELPUG, SPIGen Help InstructionsGetting Started
Design Resources
Software
Quick reference to our software types.
2 software files
-
Configuration Tools
12XS6 SPIGEN Configuration File
-
BSPs and Device Drivers
KIT07XS6517 SPIGEN Configuration File
Note: For better experience, software downloads are recommended on desktop.