Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
- No Longer Manufactured
- NX5P3201CUK
3 A USB Power Switch and 6 A High-Side Load Switch
- This page contains information on a product that is no longer manufactured (discontinued). Specifications and information herein are available for historical reference only.
The NX5P3201 is an advanced dual power switch consisting of two independent switches. They are, an advanced 3 A bidirectional power switch (SWP) for USB OTG and charger port applications, and a high-side 6 A load switch (SW5).
SWP includes an open-drain status indicator. It also consists of OverTemperature Protection (OTP), UnderVoltage LockOut (UVLO) and OverVoltage LockOut (OVLO) protection circuits. The OVLO circuit isolates the pin VBUS when more than 6.55 V is applied to pin VBUS via the USB connector. To prevent unnecessary switching due to ringing on pins VBUS or PMU, the UVLO circuits include a 15 ms turn-on delay. This deglitch function allows the applied voltage to stabilize above VUVLO before closing SWP.
SW5 consists of OTP, Reverse Current Protection (RCP), and UVLO protection circuits. The UVLO isolates VBAT from VIN until VI exceeds VUVLO. If the voltage at VBAT exceeds VI by 30 mV, the RCP circuit isolates VBAT from VIN. It prevents damage to devices on the input side of the switch.
Both switches include slew rate controlled inrush current reduction to prevent damage when switching high capacitive loads.
Product Details
Features
- 28 V tolerant VBUS supply pin
- Wide supply voltage range from 3.4 V to 6.55 V for SWP and 2.7 V to 5.5 V for SW5
- Automatic SWP operation
- ISW continuous current: 3 A for SWP and 6 A for SW5
- Low ON resistance: 32 mΩ (typical) for SWP and 8 mΩ (typical) for SW5
- Soft-start, slew rate controlled turn-on time
- Status indicator output
-
Protection circuitry:
- Reverse current protection
- Overtemperature protection
- Overvoltage lockout
- Undervoltage lockout
-
ESD protection:
- IEC61000-4-2 contact discharge exceeds 8 kV for pin VBUS
- HBM JS-001-2012 class 3 A exceeds 4 kV
- IEC61000-4-5 surge test exceeds 100 V for pin VBUS
- Specified from -40 °C to +85 °C ambient temperature
Target Applications
- Smartphone and feature phones
- Tablets and e-books
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
