Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
Package
WLCSP: wafer level chip-scale package; 30 bumps; 2.26 x 2.56 x 0.51 mm (backside coating included)
Buy Options
NX5P3201CUKZ
No Longer Manufactured
12NC: 935304622012
Details
Order
Operating Features
| Parameter | Value |
|---|---|
IDD [typ] (nA) | 3000 |
Number of pins | 30 |
Operating Voltage [Min to Max] (V) | 3.4 to 6.5 |
Package Style | UC |
VDC Absolute (Max) (V) | 28 |
Isw (A) | 3 |
Supply Voltage [max] (V) | 6.5 |
Supply Voltage [min] (V) | 3.4 |
| Parameter | Value |
|---|---|
ICC [typ] (mA) | 3000 |
IDD [typ] (uA) | 3000000 |
Pad supply (V) | 3.4 to 6.5 |
Average Current @ 1Hz ODR (nA) | 3000000000 |
Supply Voltage [Min to Max] (V) | 3.4 to 6.5 |
Description | 3 A USB power switch and 6 A high-side load switch |
Supply Voltage [Min - Max] | 3.4, 6.5 |
Environmental
| Part/12NC | PbFree | EU RoHS | Halogen Free | RHF Indicator | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
NX5P3201CUKZ(935304622012) | Yes | Yes | Yes |  | REACH SVHC | 1.0 |
Quality
| Part/12NC | Safe Assure Functional Safety | Moisture Sensitivity Level (MSL) | |
|---|---|---|---|
| Lead Soldering | Lead Free Soldering | ||
NX5P3201CUKZ (935304622012) | - | 1 | 1 |
Shipping
| Part/12NC | Harmonized Tariff (US)Disclaimer |
|---|---|
NX5P3201CUKZ (935304622012) | 854239 |
More about NX5P3201CUK
The NX5P3201 is an advanced dual power switch consisting of two independent switches. They are, an advanced 3 A bidirectional power switch (SWP) for USB OTG and charger port applications, and a high-side 6 A load switch (SW5).
SWP includes an open-drain status indicator. It also consists of OverTemperature Protection (OTP), UnderVoltage LockOut (UVLO) and OverVoltage LockOut (OVLO) protection circuits. The OVLO circuit isolates the pin VBUS when more than 6.55 V is applied to pin VBUS via the USB connector. To prevent unnecessary switching due to ringing on pins VBUS or PMU, the UVLO circuits include a 15 ms turn-on delay. This deglitch function allows the applied voltage to stabilize above VUVLO before closing SWP.
SW5 consists of OTP, Reverse Current Protection (RCP), and UVLO protection circuits. The UVLO isolates VBAT from VIN until VI exceeds VUVLO. If the voltage at VBAT exceeds VI by 30 mV, the RCP circuit isolates VBAT from VIN. It prevents damage to devices on the input side of the switch.
Both switches include slew rate controlled inrush current reduction to prevent damage when switching high capacitive loads.