PLC Control Board
NXP’s solutions portfolio offers key components, including low power edge microcontrollers and processors with multiple communications interfaces, high-precision and high-performance analog and digital front ends, security and functional safety. PLCs are integral to industrial control their primary function is to control individual machines or stations in real time making low latency a key factor.
Supported Devices
Interfaces
3.3 V / 5 V IO CAN Transceivers
- TJA1042: High-Speed CAN Transceiver with Standby Mode
Processors and Microcontrollers
S32K Auto General-Purpose MCUs
- S32K1: S32K1 Microcontrollers for Automotive General Purpose
i.MX RT Crossover MCUs
- i.MX-RT1060: i.MX RT1060: Crossover MCU with Arm® Cortex®-M7
Features
i.MXRT1060
- Highest performing Arm Cortex-M7
- 3020 CoreMark/1284 DMIPS @ 600 MHz
- 1MB On-Chip SRAM - up to 512KB configurable as Tightly Coupled Memory (TCM)
- Real-time, low-latency response as low as 20 ns
- Industry’s lowest dynamic power with an integrated DC-DC converter
- Low-power run modes at 24MHz
S32K1 Scalable single platform
- 48 MHz Cortex-M0+ core or 80/112 MHz Cortex-M4F core
- 128 kB to 2 MB flash memory with ECC. Up to 4KB EEPROM
- 12-bit 1 Msps ADC, 16-bit FlexTimers with dead-time insertion and fault detection
- Scalable low power Run and Stop modes. Fast wake-up, clock and power gating
- QFN, LQFP and MAPBGA packages. -40 to 125/150° C. Minimum 15 years longevity
- AEC-Q100 qualified
S32K1 Safety, security and connectivity
- Functional Safety ISO 26262 compliant, up to ASIL B
- HW and SW watchdogs, clock/power/temperature monitors
- Safety documentation and SafeAssure community support
- CSEc security engine - AES-128, secure boot and key storage
- Ethernet (10/100 Mbit/s), CAN FD, FlexIO (UART, I2C, SPI, I2S, LIN, PWM...), serial audio interface, QSPI
