Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
Low-Power Smart Card Interface
The TDA8034T/TDA8034AT is a cost-effective analog interface for asynchronous and synchronous smart cards operating at 5 V or 3 V. Using few external components, the TDA8034T/TDA8034AT provides all supply, protection and control functions between a smart card and the microcontroller.
SOT109-3 (SO16)
Product Details
Features
- Integrated circuit smart card interface in an SO16 package
- 5 V or 3 V smart card supply
- One protected half-duplex bidirectional buffered I/O line (C7)
- VCC regulation:
- 5 V ± 5 % or 3 V ± 5 % using two low ESR multilayer ceramic capacitors: one of 220 nF and one of 470 nF
- current spikes of 40 nA/s (VCC = 5 V and 3 V) or 15 nA/s (VCC =1.8 V) up to 20 MHz, with controlled rise and fall times and filtered overload detection of approximately 120 mA
- Thermal and short-circuit protection for all card contacts
- Automatic activation and deactivation sequences triggered by a short-circuit, card take-off, overheating, falling VDD, VDD(INTF) or VDDP
- Enhanced card-side ElectroStatic Discharge (ESD) protection of > 6 kV
- External clock input up to 26 MHz connected to pin XTAL1
- Card clock generation up to 20 MHz using pin CLKDIV1 with synchronous frequency changes of:
- 1/2 fxtal or 1/4 fxtal on TDA8034T
- fxtal or 1/2 fxtal on TDA8034AT
- Non-inverted control of pin RST using pin RSTIN
- Compatible with ISO 7816, NDS and EMV 4.2 payment systems
- Supply supervisor for killing spikes during power on and off:
- using a fixed threshold
- using an external resistor bridge with threshold adjustment
- Built-in debouncing on card presence contacts (typically 4.5 ms)
- Multiplexed status signal using pin OFFN
Target Applications
- Pay TV
- Electronic payment
- Identification
- Bank card readers
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
1-5 of 11 documents
-
Data Sheet
Low power smart card interface
-
Data Sheet
Smart card interface
-
Application Note
TDA80xx EMVCo related measurements and calculations
-
Application Note
End of life TDA80xx migration path to active portfolio
-
Application Note
TDA8034HN - Smart Card reader interface
Design Resources
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
1-5 of 8 engineering services
-
Independent Design House (IDH)
EMV & Payment Certification
-
Independent Design House (IDH)
Embedded Software development
-
Independent Design House (IDH)
Engineering Services and Consulting
-
Independent Design House (IDH)
Cryptography
-
Independent Design House (IDH)
Software Integration
To find additional partner offerings that support this product, visit our Partner Marketplace.