For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Design Center
Training
Get to Know PiL Validation and Verification With the NXP MBDT

Get to Know PiL Validation and Verification With the NXP MBDT

About This Training

The processor-in-the-loop (PiL) testing on NXP Model-Based Design Toolbox (MBDT) puts the controller model onto an S32K144 embedded microcontroller board and runs a closed-loop simulation with the simulated plant.

This session will show how to replace any generic Controller Subsystem with a PiL block. We aim to have the controller code running on the NXP S32K144EVB board for helping you identify if the embedded microcontroller board can run the developed Controller Subsystem logic. The webinar will also cover how to rectify the model using additional simulation models like SiL or MiL if there are glitches.

Training Outline

Introducing the LIN Communication Blocks of the NXP MBDT

Get to Know PiL Validation and Verification With the NXP MBDT

Introducing LPTMR and LPIT Timer Blocks From NXP MBDT

Presentation

Get to know PiL Validation and Verification with the NXP MBDT -

What You Will Learn

Understand the basics, features and benefits of PiL simulation
Use NXP MBDT blocks to validate the PiL results
Learn to transform any generic Simulink^® model into a PiL simulation

Presented by

Daniel Popa
MBDT Product Manager and Software Architect, Automotive Processing, NXP

DURATION

59 min

LANGUAGE

English

0Views0Likes

We are looking for ways to improve.

Take the survey.

Additional Resources

Have a question? Ask the community.

Ask our Motor Control Class: Processor-in-the-Loop (PIL) community and get expert advice.

Stay In the Loop

Subscribe to our newsletter to stay updated with our latest developments and if you need further assistance, we are here to help.

Subscribe Contact Support