USB PD 45W Mobile Charging | NXP Semiconductors

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Roll over image to zoom in

The USB PD 45W Mobile Charger enables the design of power supplies featuring extreme low standby power with the output voltage in full-regulation, very high-efficiency and high-reliability. The NXP^® chipset used is targeting mobile and notebook power supplies with power requirements up to 100W. Supplies can be designed easily and with a minimum number of external components.

The USB PD 45W Mobile Charger supports the following standards:

USB PD3.0 - PD3.0 certified
USB PD2.0 - PD2.0 certified
QC4.0+ - QC4.0+ certified

Documentation

Quick reference to our documentation types.

4 documents

Compact List

TEA19051B AND TEA19032 QC4(+) secondary-side SMPS controller application note[AN12139]

PDFApr 24, 2018Rev 1.0
TEA19361T GreenChip SMPS control IC[AN11879]

PDFOct 5, 2017Rev 1.1

TEA1999DB1546 synchronous rectifier controller demo board[UM11119]

PDFSep 12, 2018Rev 1.0
TEA1936xDB1533 45 W USB-PD and QC 4.0 demo board[UM11077]

PDFApr 16, 2018Rev 1.0

USB PD 45W Mobile Charging

Documentation

Filter by

Application Note (2)

TEA19051B AND TEA19032 QC4(+) secondary-side SMPS controller application note[AN12139]

TEA19361T GreenChip SMPS control IC[AN11879]

User Guide (2)

TEA1999DB1546 synchronous rectifier controller demo board[UM11119]

TEA1936xDB1533 45 W USB-PD and QC 4.0 demo board[UM11077]

Filter by

Application Note (2)

TEA19051B AND TEA19032 QC4(+) secondary-side SMPS controller application note[AN12139]

TEA19361T GreenChip SMPS control IC[AN11879]

User Guide (2)

TEA1999DB1546 synchronous rectifier controller demo board[UM11119]

TEA1936xDB1533 45 W USB-PD and QC 4.0 demo board[UM11077]

Support

What do you need help with?

Recommended Communities

Suggested Links

Recently viewed products