Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
- No Longer Manufactured
- SC18IS602B
I²C-Bus to SPI Bridge
- This page contains information on a product that is no longer manufactured (discontinued). Specifications and information herein are available for historical reference only.
The SC18IS602B is designed to serve as an interface between a standard I2C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I2C-bus. The SC18IS602B operates as an I2C-bus target-transmitter or target-receiver and an SPI leader. The SC18IS602B controls all the SPI bus-specific sequences, protocol, and timing. The SC18IS602B has its own internal oscillator, and it supports four SPI chip select outputs that may be configured as GPIO when not used.
Outline 3d SOT403-1
Product Details
Features
Key Features
- I2C-bus target interface operating up to 400 kHz
- SPI leader operating up to 1.8 Mbit/s
- 200-byte data buffer
- Up to four follower select outputs
- Up to four programmable I/O pins
- Operating supply voltage: 2.4 V to 3.6 V
- Low power mode
- Internal oscillator option
- Active LOW interrupt output
- ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101
- Latch-up testing is done to JEDEC Standard JESD78 that exceeds 100 mA
- Very small 16-pin TSSOP
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
2 documents
-
Data Sheet
Archived - I2C-bus to SPI bridge
-
Brochure
NXP High-speed UARTs and Bridge ICs
