SC16C754BIBM Product Information|NXP

Buy Options

SC16C754BIBM,128

No Longer Manufactured

12NC: 935279069128

Details

Order

SC16C754BIBM,151

No Longer Manufactured

12NC: 935279069151

Details

Order

SC16C754BIBM,157

No Longer Manufactured

12NC: 935279069157

Details

Order

Operating Features

ParameterValue
Channel
4
Function
SC16C850

Environmental

Part/12NCPbFreeEU RoHSHalogen FreeRHF IndicatorREACH SVHCWeight (mg)
SC16C754BIBM,128(935279069128)
Yes
Yes
Certificate Of Analysis (CoA)
Yes
DREACH SVHC
187.0
SC16C754BIBM,151(935279069151)
Yes
Yes
Certificate Of Analysis (CoA)
Yes
DREACH SVHC
187.0
SC16C754BIBM,157(935279069157)
Yes
Yes
Yes
DREACH SVHC
187.0

Quality

Part/12NCSafe Assure Functional SafetyMoisture Sensitivity Level (MSL)Peak Package Body Temperature (PPT) (C°)FITMTBFIR
Lead SolderingLead Free SolderingLead SolderingLead Free Soldering
SC16C754BIBM,128
(935279069128)
No
1
1
240
260
2.0
5.0E8
0.0
SC16C754BIBM,151
(935279069151)
No
1
1
240
260
2.0
5.0E8
0.0
SC16C754BIBM,157
(935279069157)
No
1
1
240
260
2.0
5.0E8
0.0

Shipping

Part/12NCHarmonized Tariff (US)Disclaimer
SC16C754BIBM,128
(935279069128)
854231
SC16C754BIBM,151
(935279069151)
854231
SC16C754BIBM,157
(935279069157)
854231

Discontinued and Replacement Part Data

Part/12NCDiscontinuance NoticeLast Time Buy DateLast Time Delivery DateReplacement
SC16C754BIBM,157
(935279069157)
-
2018-01-24
2018-07-24
SC16C754BIBM,128
(935279069128)

More about SC16C754B

The SC16C754B is a quad Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFOs, automatic hardware/software flow control, and data rates up to 5 Mbit/s (3.3 V and 5 V). The SC16C754B offers enhanced features. It has a Transmission Control Register (TCR) that stores receiver FIFO threshold levels to start/stop transmission during hardware and software flow control. With the FIFO Ready (FIFO Rdy) register, the software gets the status of TXRDY/RXRDYfor all four ports in one access. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows on-board diagnostics.

The UART transmits data, sent to it over the peripheral 8-bit bus, on the TX signal and receives characters on the RX signal. Characters can be programmed to be 5, 6, 7, or 8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be programmed to interrupt at different trigger levels. The UART generates its own desired baud rate based upon a programmable divisor and its input clock. It can transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect break, idle, or framing errors, FIFO overflow, and parity errors. The transmitter can detect FIFO underflow. The UART also contains a software interface for modem control operations, and has software flow control and hardware flow control capabilities.

The SC16C754B is available in plastic LQFP64, LQFP80 and PLCC68 packages.

More