Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
8-bit General Purpose SH MCUs
The S08SH family is a series of S08 8-bit microcontrollers that offer a new low-end option for applications in the 5-volt range. The S08SH family is pin, tool and software compatible with S08SG, offering greater design flexibility. It also has wide peripheral offering with serial communications interface (SCI), serial peripheral interface (SPI), I²C, analog-to-digital converter (ADC), analog comparator and temperature sensor.
Product Details
Features
8-bit HCS08 Central Processor Unit (CPU)
- Up to 40 MHz HCS08 CPU (20 MHz bus frequency) for 50 ns minimum instruction time
- HC08 instruction set with added BGND instruction
- Support for up to 32 interrupt/reset sources
Integrated Third-Generation Flash Memory and RAM
- Embedded flash that is in-application reprogrammable
- Fast, byte-writable programming, as fast as 20 µs/byte
- Up to 100,000 write/erase cycles at typical voltage and temperature (10k minimum write/erase)
- 100 years typical data retention (15 years minimum)
Flexible Clock Options
- Internal clock source (ICS) module containing a frequencylocked loop (FLL) controlled by internal or external reference
- Precision trimming of internal reference allows typical 0.1 percent resolution and +0.5 percent to -1 percent deviation over operating temperature and voltage
- Internal reference can be trimmed from 31.25 kHz to 39.065 kHz, allowing for 16 MHz to 20 MHz FLL output
- Low-power oscillator module (XOSC)
- software selectable crystal or ceramic resonator range, 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz,
- supports external clock source input up to 40 MHz
Input/Output
- Up to 23 bidirectional lines
- One Output-Only Line
- Outputs 10 mA each; 60 mA max for package
- Software selectable pull-ups on ports when used as input
- internal pull-up on reset and interrupt request (IRQ) pin
- Software selectable slew rate control and drive strength on ports when used as output
- 8-pin keyboard interrupt module with software selectable polarity on edge or edge/level modes
Ganged Output Option for PTB (5:2) and PTC (3:0)
- Allows single write to change state of multiple pins
- Drives up to 80 mA without risk of runaway code shorting
- Provides option to tie multiple pins from different ports to same control registers
- Safely drives multiple outputs
Multiple Serial Communication Options
- Serial communications interface module with option for 13-bit break capabilities and double-buffered transmit and receive
- Serial peripheral interface module and I²C bus module
Integrated Analog Peripherals
- 16-ch., 10-bit analog-to-digital converter (ADC)
- Automatic compare function, software programmable for greater than/equal to or less than conditions
- Asynchronous clock source
- Temperature sensor
- Internal bandgap reference channel
- Hardware triggerable using the RTI counter
- Low-power and high-speed options
- Analog comparator module (ACMP)
- Option to compare to internal reference
- Option to route comparator output directly to pin
- Output can be optionally routed to TPM module as input capture trigger
- Real-time-counter (RTC)
- 8-bit modulus counter with binary or decimal based prescaler
- External clock source for prescise time base, time-of-day, calendar or task scheduling functions
Three Timer Modules
- Programmable 16-bit timer/PWM modules (TPM1 and TPM2)
- 8-bit modulo timer module (MTIM) with 8-bit prescaler
System Protection
- Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock
- Low-voltage detection with reset or interrupt
- Illegal opcode detection with reset
- Flexible block protection
- Security feature for flash and RAM
- Always-on power-on reset (POR) circuitry
Development Support
- Background Debugging System
- On-Chip In-Circuit Emulation (ICE)
- Real-Time Bus Capture
S08SH Family Comparison
| Features | S08SH | S08SG | S08QG | S08QD | RS08KA |
| Core | HCS08 | HCS08 | HCS08 | HCS08 | RS08 |
| Operating Voltage (V) | 2.7 - 5.5 | 2.7 - 5.5 | 1.8 - 3.6 | 2.7 - 5.5 | 1.8 - 5.5 |
| Bus Frequency (MHz) | 20 | 20 | 10 | 8 | 10 |
| Flash (Kbyte) | 4 / 8 | 4 / 8 / 16 / 32 | 4 / 8 | 2 / 4 | 1 / 2 |
| RAM (byte) | 256 / 512 | 256 / 512 / 1024 | 256 / 512 | 128 / 256 | 63 |
| Serial Comunications | SCI/w LIN Support
SPI I²C |
SCI
SPI I²C |
SCI
SPI I²C |
None | None |
| ADC | Up to 12 channels (10 bits) | Up to 16 channels (10 bits) | Up to 8 channels (10 bits) | Up to 4 channels (10 bits) | None |
| Analog Comparator | Yes | Yes | Yes | No | Yes |
| Timers | Up to Two Timers 16-bits (2 Channels each) | Up to Two Timers 16-bits (2 channels each) | One Timer 16-bit (2 channels)
One 8-bit |
Two Timers 16-bit (2 and 1 channels) | One Timer 8-bits |
| Tempeature Ranges (°C) | -40 to 85
-40 to 125 |
-40 to 85
-40 to 105 -40 to 125 |
-40 to 85 | -40 to 85
-40 to 105 -40 to 125 |
-40 to 85 |
| Package | 8-pin SOIC
16-pin TSSOP 20-pin PDIP/TSSOP 24-pin QFN |
8-pin SOIC
16-pin TSSOP 20-pin TSSOP 24-pin TSSOP 28-pin TSSOP |
8-pin DIP/SOIC/QFN
16-pin DIP/TSSOP/QFN |
8-pin DIP/SOIC | 6-pin QFN
8-pin DIP/SOIC |
S08SH Family is pin, tool and software compatible with S08SG, offering greater design flexibility.
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
1-5 of 23 documents
-
Data Sheet
MC9S08SH8 - Data SheetFeatured
-
Fact Sheet
MC9S08SH8/4 - Fact sheetFeatured
-
Data Sheet
MC9S08SH16/MC9S08SH16 - Data SheetFeatured
-
Fact Sheet
S08SH16/32 Fact SheetFeatured
-
Reference Manual
HCS08 Family Reference Manual
Design Resources
Hardware
Quick reference to our
board types.
5 hardware offerings
-
Emulators, Probes, and ProgrammersUniversal Multilink Development InterfaceFeatured
-
Evaluation and Development BoardsS08SH Family Demonstration BoardFeatured
-
Emulators, Probes, and ProgrammersPEmicro Cyclone programmer
-
Emulators, Probes, and ProgrammersPEmicro Cyclone FX programmer
-
Emulators, Probes, and ProgrammersUniversal Multilink FX High-Speed Development Interface
Software
Quick reference to our software types.
1-5 of 11 software files
-
BSPs and Device Drivers
Graphical LCD Driver for MCUs/MPUsFeatured
-
Development IDEs and Build Tools
CodeWarrior® for Microcontrollers (Classic IDE) - RS08/HC(S)08, ColdFire V1 v6.3Featured
-
Development IDEs and Build Tools
CodeWarrior® for MCUs (Eclipse IDE) - ColdFire®, 56800/E DSC, Qorivva® 56xx, RS08/S08, S12Z - 11.1Featured
-
Additional software available. View our featured partner solutions.
-
Configuration Tools
Processor Expert® Software – Component Development Environment v1.0.4
-
Configuration Tools
Embedded Component: NXPAnalogComp
Note: For better experience, software downloads are recommended on desktop.
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
2 engineering services
-
Independent Design House (IDH)
Hardware/Software Engineering Services
-
Independent Design House (IDH)
Hardware/Software development and testing
.svg)
To find additional partner offerings that support this product, visit our Partner Marketplace.