For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Design Center
Training
A Guide to Developing Voice-Enabled Products Using i.MX RT600 MCUs

A Guide to Developing Voice-Enabled Products Using i.MX RT600 MCUs

About This Training

With the mass adoption of voice assistants, more and more products are becoming voice enabled. For companies that traditionally do not have experience designing for voice and audio, this can be overwhelming and difficult.

Join this webinar as we discuss the voice stack architecture, provide some basic guidelines to follow to build a successful voice-enabled product, show recommended voice design patterns for typical consumer-based voice-enabled products and demonstrate TalkTo, DSP Concepts’ Audio Front End software running on an NXP i.MX RT685 MCU.

Presentation

A Guide to Developing Voice-Enabled Products Using i.MX RT600 MCUs

Presented by

Mike Vartanian
Director of Strategic Partnerships, DSP Concepts
Uday Pispati

Applications Engineer, DSP Concepts
Brendon Slade
MCU Ecosystem Director, NXP Semiconductors

DURATION

30 min

LANGUAGE

English

0Views0Likes

We are looking for ways to improve.

Take the survey.

Additional Resource

i.MX RT600 Crossover MCU

Stay In the Loop

Subscribe to our newsletter to stay updated with our latest developments and if you need further assistance, we are here to help.

Subscribe Contact Support