For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Design Center
Training
Future Electronics: Cyclops System for Image Processing with i.MX 8 Applications Processors

Future Electronics: Cyclops System for Image Processing with i.MX 8 Applications Processors

About This Training

Introduction to the Cyclops converter board developed by the Future Electronics System Design Center. Optionally – Set up network video stream and connect to the board from a cell phone or PC. Or set up a live stream of the video from a board to YouTube so that people can go to YouTube and see the live video coming from the sensor.

What You Will Learn

High-level block diagram overview of the system
Overview of the Cyclops board and what it is used for
Overview of the AR0144 sensor
Overview of the i.MX 8M Mini
Overview of the i.MX 8M Mini EVK and Karo i.MX 8M Mini module
Review of software requirements to get this all working
How to implement the patches created for the device tree and adding in the driver code for the iMX8M Mini EVK and/or the Karo module
Flash an image to the board and use gstreamer to display the video on the screen connected to the i.MX 8M Mini EVK or Karo module

Presented by

Don Gunn
Advanced Engineer, Future Electronics

DURATION

25 min

LANGUAGE

English

SKILL LEVEL

Beginner

0Views0Likes

We are looking for ways to improve.

Take the survey.

Additional Resources

AI and Machine Learning

i.MX Applications Processors

Have a question? Ask the community.

Ask our i.MX Processors community and get expert advice.

Stay In the Loop

Subscribe to our newsletter to stay updated with our latest developments and if you need further assistance, we are here to help.

Subscribe Contact Support