For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Design Center
Training
FreeRTOS Webinar Series: Use Advanced Techniques and Tools to Debug a FreeRTOS Project (SEGGER) | Part 3

FreeRTOS Webinar Series: Use Advanced Techniques and Tools to Debug a FreeRTOS Project (SEGGER) | Part 3

About This Training

This is the third installment in the FreeRTOS webinar series.

This session will feature advanced debug and analysis techniques available for use with FreeRTOS-based projects. In addition to exploring RTOS debug including ThreadAware, visualization and resolving peripheral/memory conflicts, we will take a closer look at how to improve debug with SEGGER tools. A demonstration of how SEGGER SystemView and Ozone debug tools can assist with RTOS debugging will be shown.

The featured speaker on this call will be FreeRTOS founder, Richard Barry of AWS.

Presentation

FreeRTOS Webinar Series: Use Advanced Techniques and Tools to Debug a FreeRTOS Project (SEGGER) | Part 3

What You Will Learn

An overview of RTOS debug
How to improve debug with SEGGER Tools
Valuable insight from FreeRTOS founder, Richard Barry and SEGGER's Axel Wolf

Presented by

Richard Barry
Founder of FreeRTOS, AWS
Anthony Huereca
Senior Systems Engineer, NXP Semiconductors
Axel Wolf
Technical Director, SEGGER US

DURATION

1 hr

LANGUAGE

English

SKILL LEVEL

Beginner

0Views0Likes

We are looking for ways to improve.

Take the survey.

Additional Resources

FreeRTOS IoT Demo Project

Related Trainings

Have a question? Ask the community.

Ask our FreeRTOS and SEGGER community and get expert advice.

Stay In the Loop

Subscribe to our newsletter to stay updated with our latest developments and if you need further assistance, we are here to help.

Subscribe Contact Support