Ultra-Reliable MPC564xB-C MCU for Automotive and Industrial Control Applications
Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
System Basis Chip Gen2 with High Speed CAN
The NXP MC33904 is a device in the second generation family of system basis chips, combining several features and enhanced module designs.
- Works as an advanced power management unit for the MCU and additional integrated circuits such as sensors and CAN transceivers
- Built-in enhanced high-speed CAN interface (ISO11898-2 and -5), with local and bus failure diagnostics, protection and fail-safe operation mode
- The SBC may include zero, one or two LIN 2.1 interfaces with LIN output pin switches and includes 2 or 3 wake-up input pins than can also be configured as output drivers for flexibility
Product Details
Features
Key Features
- Voltage regulator for MCU, 5.0 V or 3.3 V, part number selectable, with possibility of usage external PNP to extend current capability and share power dissipation
- Voltage, current and temperature protection
- Very low quiescent current in low power modes
- Fully-protected embedded 5.0 V regulator for the CAN driver
- Multiple under-voltage detections to address various MCU specifications and system operation modes (i.e. cranking)
- Auxiliary 5.0 V or 3.3 V SPI configurable regulator, for additional ICs, with over-current detection and under-voltage protection
- MUX output pin for device internal analog signal monitoring and power supply monitoring
- Advanced SPI, MCU, ECU power supply and critical pins diagnostics and monitoring.
- Multiple wake-up sources in low-power modes: CAN bus, I/O transition, automatic timer, SPI message and VDD over-current detection.
- ISO11898-5 high speed CAN interface compatibility for baud rates of 40 kb/s to 1.0 Mb/s
Related products
Ultra-Reliable MPC564xA MCU for Automotive and Industrial Engine Management
Ultra-Reliable MPC56xB MCU for Automotive and Industrial General Purpose
Buy/Parametrics
| | | | | |
|---|---|---|---|---|---|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
Documentation
Quick reference to our documentation types.
1-5 of 9 documents
-
Errata
MC33903, MC33904, and MC33905, Mask M87W, Rev. 3.2 ErrataFeatured
-
Application Note
AN12048, Safety application note for MC33904 and MC33905
1-5 of 9 documents
-
Errata
MC33903, MC33904, and MC33905, Mask M87W, Rev. 3.2 ErrataFeatured
-
Application Note
AN12048, Safety application note for MC33904 and MC33905
Design Resources
Hardware
Quick reference to our
board types.
2 hardware offerings
-
Evaluation and Development BoardsEvaluation Kit for 33905D3 System Basis Chip Gen2 with CAN and LINFeatured
-
Evaluation and Development Boards
Evaluation Kit - 33905D5, SBC Gen2 with CAN and LINFeatured
Software
Quick reference to our software types.
1 software file
-
Configuration Tools
SPI Generator (SPIGen) Software
Note: For better experience, software downloads are recommended on desktop.
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
4 engineering services
-
Independent Design House (IDH)
Hardware/Software Engineering Services
-
Independent Design House (IDH)
Hardware/Software Engineering Services
-
Original Design Manufacturer (ODM)
Hardware and Software Engineering Services
-
Independent Design House (IDH)
Hardware/Software Engineering Services
To find additional partner offerings that support this product, visit our Partner Marketplace.