Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
- No Longer Manufactured
- MPC17533
Dual H-Bridge, Motor Driver, 2-6.8V, 1.4A, 200kHz
The NXP® MPC17533 is a monolithic dual H-Bridge IC that is ideal in portable electronic applications for controlling stepper or Brush DC-motors, such as camera lens shutters and optical disk drives.
- Operates from 2.0 V to 6.8 V, with independent control of each H-Bridge via the parallel MCU interface (3.0 V and 5.0 V compatible logic)
- Built-in shoot through current protection and undervoltage detector to avoid malfunction
- Four output control modes: Forward, Reverse, Brake, Tri-state (Open) and low ON-Resistance of 1.2 Ohm (max)
- Can drive various type of micro motor with low loss via parallel drive because each section has very efficient drivers for PWM Control for high speed drive
Documentation
Quick reference to our documentation types.
3 documents
-
Data Sheet
MPC17533, 0.7 A, 6.8 V, Dual H-Bridge Motor Driver - Data SheetFeatured
-
Application Note
AN3670, Implementing a DSI Network Using the MC33781 and the MC33784
3 documents
-
Data Sheet
MPC17533, 0.7 A, 6.8 V, Dual H-Bridge Motor Driver - Data SheetFeatured
-
Application Note
AN3670, Implementing a DSI Network Using the MC33781 and the MC33784
Design Resources
Software
Quick reference to our software types.
2 software files
-
Configuration Tools
Embedded SW: Low-Voltage H-Bridge Software Driver Built on SDK
-
Configuration Tools
Embedded Component: Low Voltage H-Bridge
Note: For better experience, software downloads are recommended on desktop.