LPC4330FBD144|Arm Cortex-M4/M0|32-bit MCU

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The LPC4330FBD144 is an Arm^® Cortex-M4 based digital signal controller with an Arm Cortex-M0 coprocessor designed for embedded applications requiring signal processing. The Arm Cortex-M4 core offers single-cycle Multiply-Accumulate and SIMD instructions and a hardware floating-point unit to support signal processing while the M0 coprocessor handles I/O and digital control processing. The LPC4330FBD144 includes 264 kB of data memory, two High Speed USB 2.0 Host/OTG/Devices, advanced configurable peripherals such as the State Configurable Timer (SCT), Serial General Purpose I/O (SGPIO), and SPI Flash Interface (SPIFI) as well as Ethernet, an external memory controller and multiple digital and analog peripherals.

See product image

Data Sheet

Application Notes

Product Details

Features

Arm Cortex-M4 processor, running at frequencies of up to 204 MHz
Arm Cortex-M4 built-in Memory Protection Unit (MPU) supporting eight regions
Arm Cortex-M4 built-in Nested Vectored Interrupt Controller (NVIC)
Hardware floating-point unit
Non-maskable Interrupt (NMI) input
JTAG and Serial Wire Debug (SWD)
System tick timer
Arm Cortex-M0 co-processor running at frequencies of up to 204 MHz
264 kB SRAM for code and data use
Two 32 kB SRAM blocks with separate bus access
32 kB ROM containing boot code and on-chip software drivers
32 bit One-Time Programmable (OTP) memory for customer use
Serial GPIO (SGPIO) interface
State Configurable Timer (SCT) subsystem on AHB
Quad SPI Flash Interface (SPIFI) with four lanes and up to 40 MB per second
10/100T Ethernet MAC with RMII and MII interfaces and DMA support
One High-speed USB 2.0 Host/Device/OTG interface with DMA support
One High-speed USB 2.0 Host/Device interface with DMA support
One 550 UART with DMA support and full modem interface
Three 550 USARTs with DMA and synchronous mode support
One C_CAN 2.0B controller with one channel
Two SSP controllers with FIFO and multi-protocol support
One SPI controller
One Fast-mode Plus I2C-bus interface with rates of up to 1 Mbit/s
One Fast-mode I2C-bus interface
Two I2S interfaces
External Memory Controller (EMC) supporting external SRAM, ROM, flash, SDRAM
Secure Digital Input Output (SDIO) card interface
Eight-channel General-Purpose DMA (GPDMA) controller
Up to 83 General-Purpose Input/Output (GPIO) pins
Four general-purpose timer/counters with capture and match capabilities
One motor control Pulse Width Modulator (PWM) for three-phase motor control
One Quadrature Encoder Interface (QEI)
Repetitive Interrupt timer (RI timer)
Windowed watchdog timer (WWDT)
Ultra-low power Real-Time Clock (RTC) on separate power domain
Alarm timer; can be battery powered
One 10-bit DAC with DMA support and a data conversion rate of 400 kSamples/s
Two 10-bit ADCs with DMA support and a data conversion rate of 400 kSamples/s
Two 128-bit secure OTP memories for AES key storage and customer use
Crystal oscillator with an operating range of 1 MHz to 25 MHz
12 MHz Internal RC (IRC) oscillator trimmed to 1 % accuracy
Ultra-low power Real-Time Clock (RTC) crystal oscillator
Three PLLs allow CPU operation up to the maximum CPU rate
Clock output
Single 3.3 V (2.2 V to 3.6 V) power supply with on-chip DC-to-DC converter
RTC power domain can be powered separately by a 3 V battery supply
Four reduced power modes
Processor wake-up from Sleep mode via wake-up interrupts
Brownout detect with four separate thresholds for interrupt and forced reset
Power-On Reset (POR)
see selection guide for features per type

Target Applications

Industrial
Consumer
White goods
RFID readers
e-Metering

Part numbers include: LPC4330FBD144.

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Documentation

Quick reference to our documentation types.

1-5 of 30 documents

^{Data Sheet}
32-bit Arm^® Cortex^®-M4/M0 flashless MCU; up to 264 kB SRAM; Ethernet; two HS USBs; advanced configurable peripherals

PDFRev 4.6Mar 14, 20163.1 MBLPC4350_30_20_10English, 中文
^{Application Note}
Using SGPIO to emulate an SPI leader interface

ZIPRev 1.0Feb 20, 2019197.0 KBAN11210English
^{Application Note}
USBD Library for LPC4300/LPC1800 series MCUs

ZIPRev 1.0Jul 9, 20188.6 MBTN00041English
^{Application Note}
Connecting TFT LCD with LCD controller of LPC MCU

ZIPRev 1Aug 22, 20173.2 MBAN12027English
^{Application Note}
SCTimer/PWM cookbook

ZIPRev 5.0Mar 22, 201625.5 MBAN11538English, 中文
^{Application Note}
Inter Processor Communication on LPC43xx

ZIPRev 2.0Aug 28, 2014999.7 KBAN11177English
^{Application Note}
Code Read Protection in LPC1800 and LPC4300

ZIPRev 1.0Aug 14, 201416.6 MBAN11581English
^{Application Note}
Implementing PWM dithering on the LPC18xx SCTimer/PWM

ZIPRev 1.0Aug 8, 20141.7 MBAN11580English
^{Application Note}
SCT camera interface design with LPC1800 and LPC4300

ZIPRev 1.2Jun 12, 20141.4 MBAN11365English
^{Application Note}
AES encryption and decryption software on LPC microcontrollers

ZIPRev 1.1Mar 17, 2014177.9 KBAN11241English
^{Application Note}
SDRAM interface to LPC18xx/43xx EMC

PDFRev 1.0Jan 31, 2014351.0 KBAN11508English
^{Application Note}
Connecting a High Speed USB PHY via ULPI

ZIPRev 1.0Aug 28, 2013366.1 KBAN11309English
^{Application Note}
LPC1800/LPC4300 One-Time Programmable (OTP) configuration

ZIPRev 1.0Aug 23, 2013232.2 KBAN11292English
^{Application Note}
Using the SCT in LPCXpresso, Keil, and IAR

ZIPRev 1.0Aug 9, 20134.2 MBAN11161English
^{Application Note}
Wrting a flash programming algorithm for unsupported devices

ZIPRev 1.0Aug 9, 2013398.5 KBAN11285English
^{Application Note}
Using SPIFI on LPC1800 and LPC4300

ZIPRev 1.0Aug 9, 20137.2 MBAN11206English
^{Application Note}
SGPIO on the LPC4300

ZIPRev 1.1Aug 9, 2013993.0 KBAN11275English
^{Application Note}
How to implement the PMBus software stack

ZIPRev 1.0Jul 22, 20131.1 MBAN11318English
^{Application Note}
Implementing a UART using SGPIO on LPC4300

ZIPRev 1.0Jul 22, 20131.7 MBAN11351English
^{Application Note}
SGPIO camera module design using LPC4300

ZIPRev 1.0Jul 22, 20134.1 MBAN11343English
^{Application Note}
LPC4300 camera interface design using SGPIO

ZIPRev 1.1Jul 21, 20131.8 MBAN11196English
^{Application Note}
Bootmode jumper settings for LPC1800 and LPC4300

PDFRev 1.0Jul 23, 2012247.0 KBAN11239English
^{Application Note}
UUencoding for UART ISP

PDFRev 1.0Jul 6, 2012142.1 KBAN11229English
^{User Guide}
LPC43xx/LPC43Sxx Arm® Cortex®-M4/M0 multi-core microcontroller

PDFRev 2.5Sep 13, 201913.6 MBUM10503English
Sign in required
^Errata
Errata sheet LPC4370, LPC4350, LPC4330, LPC4320, LPC4310

PDFRev 7.2Feb 10, 20231.4 MBES_LPC43X0English
^{Package Information}
plastic low profile quad flat package; 144 leads; body 20 x 20 x 1.4 mm

PDFRev 1.0Feb 8, 2016830.0 KBSOT486-1English
^{Training Presentation}
Driving LPC1700/LPC1800/LPC4300 with EPSON Crystals

PDFRev 1.1Nov 27, 2015213.7 KBR_10076English
^{Supporting Information}
ADC design guidelines

PDFRev 1.0May 9, 2014148.8 KBTN00009English
^{Supporting Information}
Connecting a USB power switch to the LPC18xx / LPC43xx

PDFRev 1.0Mar 6, 201376.0 KBTN00007English
^{Supporting Information}
LPC1800 and LPC4300 MxMEMMAP memory map

PDFRev 1.0Dec 6, 2012148.0 KBTN00006English

Show All

Design Resources

Design Files

Quick reference to our design files types.

5 design files

Receive the full breakdown. See the product footprint and more in the eCad file.

^Models
IBIS models for LPC18x0 and LPC43x0 FBD208

ZIPRev 2Mar 25, 2020 16:19:00377.1 KBIBIS_LPC18x0_LPC43x0FBD208
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
^Models
BSDL for LPC18xx and LPC43xx

ZIPRev 2Feb 27, 2018 11:57:00269.0 KBBSDL_LPC18XX_43XX
Sign in required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
^Models
BSDL for LPC4350, LPC4330, LPC4320 and LPC4310 pkg BGA256

ZIPRev 1Jun 13, 2017 11:57:007.4 KBBSDL_LPC4350-30-20-10_BGA256
Sign in required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
^{Symbols and Footprints}
LPC43xx/LPC18xx Eagle symbols

ZIPRev 0Jun 3, 2016 00:00:0014.9 KBLPC43XX-EAGLE-SYM
Sign in required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
^{Symbols and Footprints}
LPC18XX_43XX_SCH Orcad Symbols

ZIPRev 1.0Apr 30, 2018 12:37:0052.2 KBLPC18XX_43XX_SCH_1
Sign in required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Hardware

Quick reference to our board types.

4 hardware offerings

^{Emulators, Probes, and Programmers}
Universal Multilink Development Interface

UMultilink
^{Emulators, Probes, and Programmers}
PEmicro Cyclone programmer

CYCLONE
^{Emulators, Probes, and Programmers}
PEmicro Cyclone FX programmer

CYCLONE-FX
Additional hardware available. View our featured partner solutions.
^{Emulators, Probes, and Programmers}
Universal Multilink FX High-Speed Development Interface

U-MULTILINK-FX

1-5 of 6 hardware offerings

^{Evaluation and Development Boards}
LPC4357 Developer's Kit

Embedded Artists' LPC4357 Developer's Kit lets you get up-and-running quickly with the LPC4357 OEM board, for rapid prototyping and proof-of-concept designs. The developm...

By Embedded Artists AB Gold Partner
^{Test Accessories and Debugger}
Cyclone Production ProgrammersUPDATED

Programmer for stand-alone (or cloud-connected) in-circuit flash programming, debug, & test of many NXP MCUs. Sophisticated power mgmt and dyanmic data. FX line o...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
Multilink Debug ProbesUPDATED

Multilink debug probes are BDM/JTAG debug probes for various NXP devices. Universal models support SWO debug in NXP's MCUXpresso IDE. FX model features high-speed com...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
TRACE32® Debug and Trace tools for Arm®-based NXP MPUs/MCUs

TRACE32® provides a complete suite of tools for all NXP's Arm®-based microprocessors. All of these provide unparalleled levels of debug capabilities to get the best out o...

By Lauterbach GmbH Gold Partner
^{Test Accessories and Debugger}
TRACE32® CombiProbe 2 Compact Trace for NXP Microcontrollers

CombiProbe 2 enables full insight into what an embedded system is doing at run-time. Besides its comprehensive debug capabilities, the trace simplifies system profiling o...

By Lauterbach GmbH Gold Partner
^{Test Accessories and Debugger}
TRACE32® PowerDebug System for NXP Microcontrollers/Microprocessors

PowerDebug is Lauterbach's powerful, modular, flexible debug system. It provides the broadest coverage of supported chips and core architectures in the embedded industry ...

By Lauterbach GmbH Gold Partner