Design Files
Quick reference to our
design files types.
2 design files
-
Models
BSDL for LPC175x and LPC176x
-
Symbols and Footprints
LPC175x/6x ORCAD symbols
Compact List
Scalable Mainstream 32-Bit MCU Based on ArmArm® Cortex®-M3 Core
The LPC1754 is a Cortex-M3 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 100 MHz. Features include 128 kB of flash memory, 32 kB of data memory, USB Device/Host/OTG, 8-channel DMA controller, 4 UARTs, 1 CAN channels, 2 SSP, 1 SPI, 2 I2C, 8-channel 12-bit ADC, DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock with separate battery supply, and up to 52 general purpose I/O pins.
Outline 3d SOT315-1
Product Details
Block Diagram
Features
- Arm Cortex-M3 processor, running at frequencies of up to 100 MHz
- Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
- Up to 128 kB on-chip flash programming memory
- Up to 32 kB of SRAM
- In-System Programming (ISP) and In-Application Programming (IAP)
- Eight channel General Purpose DMA controller (GPDMA)
- Multilayer AHB matrix interconnect provides a separate bus for each AHB leader
- Split APB bus allows high throughput with few stalls between the CPU and DMA
- USB 2.0 full-speed device/Host/OTG controller with dedicated DMA controller
- Four UARTs with fractional baud rate generation
- CAN 2.0B controller with one channel
- SPI controller with synchronous, serial, full duplex communication
- Two SSP controllers with FIFO and multi-protocol capabilities
- Two I2C-bus interfaces supporting fast mode with a data rate of 400 kbit/s
- 52 General Purpose I/O (GPIO) pins with configurable pull-up/down resistors
- 12-bit Analog-to-Digital Converter (ADC) with conversion rates up to 200 kHz
- 10-bit Digital-to-Analog Converter (DAC)
- Four general purpose timers/counters
- One motor control PWM with support for three-phase motor control
- Quadrature encoder interface that can monitor one external quadrature encoder
- One standard PWM/timer block with external count input
- Real-Time Clock (RTC)
- WatchDog Timer (WDT)
- Arm Cortex-M3 system tick timer, including an external clock input option
- Standard JTAG test/debug interface. Boundary scan Description Language (BSDL) is not available for this device
- Integrated PMU (Power Management Unit)
- Four reduced power modes
- Single 3.3 V power supply (2.4 V to 3.6 V)
- One external interrupt input configurable as edge/level sensitive
- Non-maskable Interrupt (NMI) input
- Wakeup Interrupt Controller (WIC)
- Processor wake-up from Power-down mode via any interrupt
- Brownout detect with separate threshold for interrupt and forced reset
- Power-On Reset (POR)
- Crystal oscillator with an operating range of 1 MHz to 25 MHz
- 4 MHz internal RC oscillator trimmed to 1 % accuracy
- PLL allows CPU operation up to the maximum CPU rate
- USB PLL for added flexibility
- Code Read Protection (CRP) with different security levels
- Unique device serial number for identification purposes
Target Applications
- eMetering
- Lighting
- Industrial networking
- Alarm systems
- White goods
- Motor control
Buy/Parametrics
1 result
Include 0 NRND
Part | Order | CAD Model | Operating Frequency [Max] (MHz) | Flash (kB) | GPIO | USB Controllers | USB (speed) | USB (type) | CAN | UART | I2C | SPI | ADC (Channels) | ADC (bits) | ADC sample rate | Timers | Timer (bits) | SCTimer / PWM | Package Type | Temperature range | Supply Voltage [min] (V) | Supply Voltage [max] (V) | Status | Product category |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
100 | 128 | 52 | 1 | FS | host/device | 1 | 4 | 3 | 2 | 1 | 12 | 400 ksps | 10 | 32 | 1 | LQFP80 | -40 °C to +85 °C | 2.4 | 3.6 | Active | 130-LPC1700- |
1-10 of 34 documents
Compact List
Application Note (25)
-
I2C secondary boot loader[AN11258]
-
LPC1700 secondary USB bootloader[AN10866]
-
SPI secondary boot loader[AN11257]
-
BLDC motor control with LPC1700[AN10898]
-
LPC176x/175x 12-bit ADC design guidelines[AN10974_ZH]
-
UUencoding for UART ISP[AN11229]
-
DSP library for LPC1700 and LPC1300[AN10913_CM3_DSP_LIBRARY_V1_0_0]
-
AN10974 - LPC176x/175x 12-bit ADC design guidelines[AN10974_-_LPC176X_175X_12-BIT_]
-
DSP library for LPC1700 and LPC1300[AN10913]
-
Migrating to the LPC1700 series[AN10878]
Brochure (2)
Data Sheet (1)
Errata (1)
-
Errata sheet LPC1759/58/56/54/52/51[ES_LPC175X]
Package Information (1)
Supporting Information (2)
-
ADC design guidelines[TN00009]
-
Footprint for wave soldering[HTQFP-HLQFP-LQFP-MSQFP-WAVE]
Training Presentation (1)
User Guide (1)
-
LPC176x/5x User manual[UM10360]
Design Resources
Hardware
Quick reference to our
board types.
1-5 of 8 hardware offerings
-
Emulators, Probes, and ProgrammersUniversal Multilink Development Interface
Active -
Emulators, Probes, and ProgrammersPEmicro Cyclone FX programmer
-
Emulators, Probes, and ProgrammersMCU-Link Debug Probe
Active -
-
Emulators, Probes, and ProgrammersMCU-Link Pro Debug Probe
Active
Software
Quick reference to our software types.
1-5 of 27 software files
-
BSPs and Device Drivers
Micro CANopen Plus
-
OS and RTOS
FreeRTOS
-
Libraries
J1939
-
Safety and Security Software
emCrypt (Encryption Library)
-
Debugging and Visualization Tools
PEmicro GDB Server for ARM® devices
To find additional partner offerings that support this product, visit our Partner Marketplace.
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
4 engineering services
-
Independent Design House (IDH)
Design Services
-
Independent Design House (IDH)
Debug Tool development
-
Independent Design House (IDH)
Wireless and Antenna Design
-
Independent Design House (IDH)
IDE development
To find additional partner offerings that support this product, visit our Partner Marketplace.
Training
1-5 of 9 trainings
-
On-Demand
CANopen
-
On-Demand
Developing with Arm Cortex-M
-
On-Demand
wolfSSL for Embedded Security
To find additional partner offerings that support this product, visit our Partner Marketplace.
