Arm9™ microcontroller with CAN and LIN

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The LPC2917/2919/01 combine an ARM968E-S CPU core with two integrated TCM blocks operating at frequencies of up to 125 MHz, CAN and LIN, 56 kB SRAM, up to 768 kB flash memory, external memory interface, two 10-bit ADCs, and multiple serial and parallel interfaces in a single chip targeted at consumer, industrial, medical, and communication markets. To optimize system power consumption, the LPC2917/2919/01 has a very flexible Clock Generation Unit (CGU) that provides dynamic clock gating and scaling.

See product image

Data Sheet

Application Notes

Product Details

Block Diagram

Choose a diagram:

Block diagram: LPC2917FBD144, LPC2919FBD144
Block diagram: LPC2917FBD144, LPC2919FBD144

Block diagram: LPC2917FBD144, LPC2919FBD144

Block diagram: LPC2917FBD144, LPC2919FBD144

Get diagram PDF

Features

Main Features

ARM968E-S processor running at frequencies of up to 125 MHz maximum.
Multi-layer AHB system bus at 125 MHz with three separate layers.
Dual-leader, eight-channel GPDMA controller on the AHB multi-layer matrix which can be used with the SPI interfaces and the UARTs, as well as for memory-to-memory transfers including the TCM memories.
External Static Memory Controller (SMC) with eight memory banks; up to 32-bit data bus; up to 24-bit address bus.
Up to 108 general-purpose I/O pins with programmable pull-up, pull-down, or bus keeper.
Vectored Interrupt Controller (VIC) with 16 priority levels.
Up to 19 level-sensitive external interrupt pins, including CAN and LIN wake-up features.
Configurable clock-out pin for driving external system clocks.
Processor wake-up from power-down via external interrupt pins; CAN or LIN activity.
Flexible Reset Generator Unit (RGU) able to control resets of individual modules.
Second CGU (CGU1) with its own PLL generates a configurable clock output.
Standard Arm test and debug interface with real-time in-circuit emulator.
Boundary-scan test supported.
ETM/ETB debug functions with 8 kB of dedicated SRAM also accessible for application code and data storage.
144-pin LQFP package.
-40 °C to +85 °C ambient operating temperature range.

On-chip memory

Two Tightly Coupled Memories (TCM), 16 kB Instruction TCM (ITCM), 16 kB Data TCM (DTCM).
Two separate internal Static RAM (SRAM) instances; 32 kB SRAM and 16 kB SRAM.
8 kB ETB SRAM also available for code execution and data.
Up to 768 kB high-speed flash-program memory.
16 kB true EEPROM, byte-erasable and programmable.

Serial interfaces

Two-channel CAN controller supporting FullCAN and extensive message filtering
Two LIN leader controllers with full hardware support for LIN communication. The LIN interface can be configured as UART to provide two additional UART interfaces.
Two 550 UARTs with 16-byte Tx and Rx FIFO depths, DMA support, and RS485/EIA-485 (9 bit) support.
Three full-duplex Q-SPIs with four follower-select lines; 16 bits wide; 8 locations deep; Tx FIFO and Rx FIFO.
Two I²C-bus interfaces.

Flexible Clock-Generation Unit (CGU0) able to control clock frequency of individual modules

On-chip very low-power ring oscillator; fixed frequency of 0.4 MHz; always on to provide a Safe_Clock source for system monitoring.
On-chip crystal oscillator with a recommended operating range from 10 MHz to 25 MHz. PLL input range 10 MHz to 25 MHz.
On-chip PLL allows CPU operation up to a maximum CPU rate of 125 MHz.
Generation of up to 11 base clocks.
Seven fractional dividers.

Highly configurable system Power Management Unit (PMU)

clock control of individual modules.
allows minimization of system operating power consumption in any configuration.

Dual power supply

CPU operating voltage: 1.8 V ± 5 %.
I/O operating voltage: 2.7 V to 3.6 V; inputs tolerant up to 5.5 V.

Other peripherals

Two 10-bit ADCs, 8 channels each, with 3.3 V measurement range and conversion times as low as 2.44 μs per channel. Each channel provides a compare function to minimize interrupts.
Multiple trigger-start option for all ADCs: timer, PWM, other ADC, and external signal input.
Four 32-bit timers each containing four capture-and-compare registers linked to I/Os.
Four six-channel PWMs (Pulse-Width Modulators) with capture and trap functionality.
Two dedicated 32-bit timers to schedule and synchronize PWM and ADC.
Quadrature encoder interface that can monitor one external quadrature encoder.
32-bit watchdog with timer change protection, running on safe clock.

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Documentation

Quick reference to our documentation types.

1-5 of 14 documents

Data Sheet
Arm9 microcontroller with CAN and LIN

PDFRev 3.0Dec 9, 2009568.2 KBLPC2917_19_01English
Application Note
LPC29xx Power-down mode explained

ZIPRev 2.0Apr 17, 2014246.9 KBAN10795English
Application Note
Guidelines for full-speed USB on NXP's LPC microcontrollers

PDFRev 1.1Feb 20, 2014151.2 KBAN11392English
Application Note
Sensorless single-shunt FOC on LPC2900

ZIPRev 1.0Feb 14, 20141.7 MBAN10899English
Application Note
UUencoding for UART ISP

PDFRev 1.0Jul 6, 2012142.1 KBAN11229English
Application Note
Migrating to the LPC1700 series

PDFRev 1.0Oct 6, 2009615.0 KBAN10878English
Application Note
NicheLite for LPC implementation notes

PDFRev 1.0Jul 16, 2009190.0 KBAN10775English
Application Note
Full-duplex software UART for LPC2000

PDFRev 1.0Jan 18, 20081.1 MBAN10689English
User Guide
LPC29xx User manual

PDFRev 3.0Oct 26, 20103.4 MBUM10316English
Brochure
Arm^®968-based microcontrollers with USB, CAN, LIN, 5V ADC and Motor Control; 125 MHz, 32-bit Microcontrollers with Arm968™ core, LPC2900 series

PDFRev 1.0Aug 31, 2008571.0 KB75016628English
Brochure
High-performance Arm^®968-based microcontroller with CAN and LIN; NXP 80-MHz, 32-bit Arm968 microcontroller LPC291x with CAN and LIN

PDFRev 1.0Aug 31, 2008160.2 KB75016101English
Errata
Errata sheet LPC2919/01

PDFRev 1.0Apr 9, 200938.0 KBES_LPC2919_01English
Package Information
plastic low profile quad flat package; 144 leads; body 20 x 20 x 1.4 mm

PDFRev 1.0Feb 8, 2016830.0 KBSOT486-1English
Training Presentation
Driving the LPC2900 with Murata resonators

PDFRev 1.1Nov 27, 201337.3 KBR_10005English

Show All

Design Resources

Design Files

Quick reference to our design files types.

2 design files

Receive the full breakdown. See the product footprint and more in the eCad file.

Models
IBIS models for LPC29xx

ZIPRev 1Jun 13, 2017 16:19:00882.5 KBIBIS_LPC29xx
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
LPC2xxx ORCAD symbols

ZIPRev 0Jun 3, 2016 00:00:0013.1 KBLPC2000-ORCAD-SYM

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Arm9^™ microcontroller with CAN and LIN

Product Details

Block Diagram

Block diagram: LPC2917FBD144, LPC2919FBD144

Block diagram: LPC2917FBD144, LPC2919FBD144

Features

Main Features

On-chip memory

Serial interfaces

Flexible Clock-Generation Unit (CGU0) able to control clock frequency of individual modules

Highly configurable system Power Management Unit (PMU)

Dual power supply

Other peripherals

Buy/Parametrics

Documentation

Filter by

Arm9 microcontroller with CAN and LIN

LPC29xx Power-down mode explained

Guidelines for full-speed USB on NXP's LPC microcontrollers

Sensorless single-shunt FOC on LPC2900

UUencoding for UART ISP

Migrating to the LPC1700 series

NicheLite for LPC implementation notes

Full-duplex software UART for LPC2000

LPC29xx User manual

Arm^®968-based microcontrollers with USB, CAN, LIN, 5V ADC and Motor Control; 125 MHz, 32-bit Microcontrollers with Arm968™ core, LPC2900 series

High-performance Arm^®968-based microcontroller with CAN and LIN; NXP 80-MHz, 32-bit Arm968 microcontroller LPC291x with CAN and LIN

Errata sheet LPC2919/01

plastic low profile quad flat package; 144 leads; body 20 x 20 x 1.4 mm

Driving the LPC2900 with Murata resonators

Design Resources

Design Files

Filter by

IBIS models for LPC29xx

LPC2xxx ORCAD symbols

Filter By

Support

What do you need help with?

Suggested Links