Arm7™ with 512 kB flash, 98 kB SRAM, Ethernet, USB 2.0 Device/Host/OTG, CAN, and 10-bit ADC

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The LPC2388 is an Arm7 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 72 MHz. Features include 512 kB of flash memory, 98 kB of SRAM, Ethernet MAC, USB Device/Host/OTG, DMA controller, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 10-bit ADC, 10-bit DAC, 2 PWM, 4 general purpose timers, low power Real-Time Clock with separate battery supply, and up to 160 general purpose I/O pins. The LPC2388 is pin-compatible to the LPC177x Cortex-M3 MCU series.

See product image

Data Sheet

Application Notes

Product Details

Block Diagram

Block diagram: LPC2388FBD144

Get diagram PDF

Features

Arm7TDMI-S^™ processor, running at up to 72 MHz
Up to 512 kB on-chip flash program memory
64 kB of SRAM on the Arm local bus for high performance CPU access
16 kB SRAM for Ethernet interface. Can also be used as general purpose SRAM
16 kB SRAM for general purpose DMA use also accessible by the USB
Dual Advanced High-performance Bus (AHB) system
EMC provides support for static devices
Advanced Vectored Interrupt Controller (VIC)
General Purpose DMA controller (GPDMA) on AHB
Ethernet MAC with associated DMA controller
USB 2.0 device/host/OTG with on-chip PHY and associated DMA controller
Four UARTs with fractional baud rate generation
CAN controller with two channels
SPI controller
Two SSP controllers, with FIFO and multi-protocol capabilities
Three I2C-bus interfaces
I2S (Inter-IC Sound) interface for digital audio input or output
SD/MMC memory card interface
104 General purpose I/O pins with configurable pull-up/down resistors
10-bit ADC with input multiplexing among 8 pins
10-bit DAC
Four general purpose timers/counters
One PWM/timer block with support for three-phase motor control
Real-Time Clock (RTC)
2 kB SRAM powered from the RTC power pin
WatchDog Timer (WDT)
Standard Arm test/debug interface for compatibility with existing tools
Emulation trace module supports real-time trace
Single 3.3 V power supply (3.0 V to 3.6 V)
Four reduced power modes: Idle, Sleep, Power-down and Deep power-down
Four external interrupt inputs configurable as edge/level sensitive
Processor wake-up from Power-down mode via any interrupt
Two independent power domains allow fine tuning of power consumption
Each peripheral has its own clock divider for further power saving
Brownout detect with separate thresholds for interrupt and forced reset
On-chip power-on reset
On-chip crystal oscillator with an operating range of 1 MHz to 25 MHz
4 MHz internal RC oscillator trimmed to 1 % accuracy
On-chip PLL
Boundary scan for simplified board testing

Target Applications

Industrial control
Medical systems
Protocol converter
Communications

Part numbers include: LPC2388FBD144.

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Documentation

Quick reference to our documentation types.

1-5 of 16 documents

^{Data Sheet}
Single-chip 16-bit/32-bit micro; 512 kB flash with ISP/IAP, Ethernet, USB 2.0 device/host/OTG, CAN, and 10-bit ADC/DAC

PDFRev 3.0Oct 15, 2013382.2 KBLPC2388English
^{Application Note}
Guidelines for full-speed USB on NXP's LPC microcontrollers

PDFRev 1.1Feb 20, 2014151.2 KBAN11392English
^{Application Note}
IEC 60601-1-8 audible alert generator using the LPC2000

ZIPRev 1.1Aug 9, 20137.5 MBAN10687English
^{Application Note}
Using IAP for LPC2000 Arm^® devices

PDFRev 1.0Jul 21, 2013125.9 KBAN10256English
^{Application Note}
UUencoding for UART ISP

PDFRev 1.0Jul 6, 2012142.1 KBAN11229English
^{Application Note}
Migrating to the LPC1700 series

PDFRev 1.0Oct 6, 2009615.0 KBAN10878English
^{Application Note}
NicheLite for LPC implementation notes

PDFRev 1.0Jul 16, 2009190.0 KBAN10775English
^{Application Note}
NXP^® USB host lite

PDFRev 1.0Jul 24, 2008252.0 KBAN10703English
^{Application Note}
Full-duplex software UART for LPC2000

PDFRev 1.0Jan 18, 20081.1 MBAN10689English
^{User Guide}
LPC23XX User manual

PDFRev 4.1Sep 11, 20123.3 MBUM10211English
Sign in required
^Brochure
Arm^®7-based microcontrollers with Ethernet, USB, and CAN peripherals; 72-MHz, 32-bit microcontroller with Arm7TDMI-S™ core LPC23xx

PDFRev 1.0Aug 31, 2008427.6 KB75016573English
^Errata
Errata sheet LPC2378/88

PDFRev 10.1Jul 23, 2012213.0 KBES_LPC2378_88English
^{Package Information}
plastic low profile quad flat package; 144 leads; body 20 x 20 x 1.4 mm

PDFRev 1.0Feb 8, 2016830.0 KBSOT486-1English
^{Supporting Information}
ADC design guidelines

PDFRev 1.0May 9, 2014148.8 KBTN00009English
^{Supporting Information}
Footprint for wave soldering

PDFRev 1.0Oct 8, 200911.2 KBHTQFP-HLQFP-LQFP-MSQFP-WAVEEnglish
^{Supporting Information}
PWM dual edge driver for 3-phase motor control using LPC23xx, LPC24xx

ZIPRev 1.0Jun 22, 200752.0 KBTN0700XEnglish

Show All

Design Resources

Design Files

Quick reference to our design files types.

1 design file

Receive the full breakdown. See the product footprint and more in the eCad file.

^{Symbols and Footprints}
LPC2xxx ORCAD symbols

ZIPRev 0Jun 3, 2016 00:00:0013.1 KBLPC2000-ORCAD-SYM
Sign in required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Software

Quick reference to our software types.

2 software files

^{Code Snippets}
Sample Code Bundle for LPC23xx/LPC24xx Peripherals using Keil's μVision

ZIPRev 1Jul 29, 2016 00:00:00914.7 KBLPC23XX-24XX-SAMP-SW
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
^{Code Snippets}
Sample Code Bundle for LPC23XX and LPC24XX Peripheral Using KEIL'S ΜVISION

ZIPRev 1Jun 14, 2017 17:34:00747.6 KBSC_LPC23XX_-_LPC24XX_KEIL-ΜVISION
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Note: For better experience, software downloads are recommended on desktop.

Arm7^™ with 512 kB flash, 98 kB SRAM, Ethernet, USB 2.0 Device/Host/OTG, CAN, and 10-bit ADC

Product Details

Block Diagram

Block diagram: LPC2388FBD144

Features

Target Applications

Buy/Parametrics

Documentation

Filter by

Single-chip 16-bit/32-bit micro; 512 kB flash with ISP/IAP, Ethernet, USB 2.0 device/host/OTG, CAN, and 10-bit ADC/DAC

Guidelines for full-speed USB on NXP's LPC microcontrollers

IEC 60601-1-8 audible alert generator using the LPC2000

Using IAP for LPC2000 Arm^® devices

UUencoding for UART ISP

Migrating to the LPC1700 series

NicheLite for LPC implementation notes

NXP^® USB host lite

Full-duplex software UART for LPC2000

LPC23XX User manual

Arm^®7-based microcontrollers with Ethernet, USB, and CAN peripherals; 72-MHz, 32-bit microcontroller with Arm7TDMI-S™ core LPC23xx

Errata sheet LPC2378/88

plastic low profile quad flat package; 144 leads; body 20 x 20 x 1.4 mm

ADC design guidelines

Footprint for wave soldering

PWM dual edge driver for 3-phase motor control using LPC23xx, LPC24xx

Design Resources

Design Files

Filter by

LPC2xxx ORCAD symbols

Filter By

Software

Filter by

Sample Code Bundle for LPC23xx/LPC24xx Peripherals using Keil's μVision

Sample Code Bundle for LPC23XX and LPC24XX Peripheral Using KEIL'S ΜVISION

Filter By

Support

What do you need help with?

Suggested Links