Receive the full breakdown. See the product footprint and more in the eCad file.
- No Longer Manufactured
- TDA8542TS: 2 × 0.7 W BTL audio amplifier
2 × 0.7 W BTL audio amplifier
- This page contains information on a product that is no longer manufactured (discontinued). Specifications and information herein are available for historical reference only.
The TDA8542TS is a two channel audio power amplifier for an output power of 2 x 0.7 W with a 16 Ω load at a 5 V supply. At a low supply voltage of 3.3 V an output power of 0.6 W with an 8 Ω load can be obtained. The circuit contains two Bridge-Tied Load (BTL) amplifiers with a complementary PNP-NPN output stage and standby/mute logic. The TDA8542TS is available in a SSOP20 package.
Buy/Parametrics
1 result
Exclude 1 NRND
Part | CAD Model | Package Type | Status | Po (W) | Output configuration | Typical Load (Ohm) | Speaker impedance (BTL / SE) | Input format | VP [min - max] (V) | Class | SNR (dB) | Power Down |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
SSOP20 | No Longer Manufactured | 0.7 | SE / BTL | 4; 8; 16 | 4; 8; 16 | Analog | 2.2 - 18 | AB | - | Yes |
Documentation
Quick reference to our documentation types.
3 documents
-
Data Sheet
2 × 0.7 W BTL audio amplifier
-
Package Information
plastic shrink small outline package; 20 leads; body width 4.4 mm
3 documents
-
Data Sheet
2 × 0.7 W BTL audio amplifier
-
Package Information
plastic shrink small outline package; 20 leads; body width 4.4 mm
Design Resources