Receive the full breakdown. See the product footprint and more in the eCad file.
Compact List
- No Longer Manufactured
- TDA8547TS
2 × 0.7 W BTL audio amplifier with output channel switching
- This page contains information on a product that is no longer manufactured (discontinued). Specifications and information herein are available for historical reference only.
The TDA8547TS is a two channel audio power amplifier for an output power of 2 x 0.7 W with a 16 Ω load at a 5 V supply. At a low supply voltage of 3.3 V an output power of 0.6 W with an 8 W load can be obtained. The circuit contains two BTL amplifiers with a complementary PNP-NPN output stage and standby/mute logic. The operating condition of all channels of the device (standby, mute or on) is externally controlled by the MODE pin. With the SELECT pin one of the output channels can be switched in the standby condition. This feature can be used for loudspeaker selection and also reduces the quiescent current consumption. When only one channel is used the maximum output power is 1.2 W.
Buy/Parametrics
1 result
Exclude 1 NRND
Part | CAD Model | Package Type | Status | THD+N (%) | Po (W) | PSRR | Output configuration | Typical Load (Ohm) | Speaker impedance (BTL / SE) | Input format | VP [min - max] (V) | Class | SNR (dB) | Power Down |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SSOP20 | No Longer Manufactured | 0.15 | 0.7 | 50 | SE / BTL | 8; 16 | 8; 16 | Analog | 2.2 - 18 | AB | - | Yes |
3 documents
Compact List
Data Sheet (1)
Package Information (1)
Packing Information (1)
Design Resources
Support
Recently viewed products
There are no recently viewed products to display.
