Receive the full breakdown. See the product footprint and more in the eCad file.
- No Longer Manufactured
- SAA7706H
Car radio Digital Signal Processor (DSP)
- This page contains information on a product that is no longer manufactured (discontinued). Specifications and information herein are available for historical reference only.
The SAA7706H performs all the signal functions in front of the power amplifiers and behind the car radio tuner AM and FM outputs and the CD, tape and phone inputs. These functions are:
- Interference absorption
- Stereo decoding for FM and AM (stereo)
- RDS-demodulation
- FM and AM weak signal processing (soft mute, sliding stereo and high cut)
- Dolby-B tape noise reduction
- CD de-emphasis function
- Audio controls for volume, balance, fader, tone and dynamics compression.
Some functions have been implemented in hardware (FM stereo decoder, RDS-demodulator and FM Interference Absorption Circuit (IAC) and are not freely programmable.
Digital audio signals from external sources with the Philips I²S-bus and the LSB-justified 16, 18, 20 and 24 bits format or SPDIF format are accepted.
The big advantage of this SAA7706H device is the ?dual media support?; this enables independent front seat and rear seat audio sources and control.
Buy/Parametrics
| | | | | |
|---|---|---|---|---|---|
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
Documentation
Quick reference to our documentation types.
4 documents
-
Data Sheet
Car radio Digital Signal Processor (DSP)
-
Application Note
TEA6848H a nice radio with circumstantial controlled selectivity
-
Package Information
plastic quad flat package; 80 leads (lead length 1.95 mm); body 14 x 20 x 2.8 mm
-
Supporting Information
Footprint for wave soldering
4 documents
-
Data Sheet
Car radio Digital Signal Processor (DSP)
-
Application Note
TEA6848H a nice radio with circumstantial controlled selectivity
-
Package Information
plastic quad flat package; 80 leads (lead length 1.95 mm); body 14 x 20 x 2.8 mm
-
Supporting Information
Footprint for wave soldering
Design Resources