Receive the full breakdown. See the product footprint and more in the eCad file.
Compact List
- No Longer Manufactured
- TDA1566 | Amplifier with Load Diagnostic Features
I2C-Bus Controlled Dual Channel 46 W/2 Ohm, Single Channel 92 W/1 Ohm Amplifier with Load Diagnostic Features
- This page contains information on a product that is no longer manufactured (discontinued). Specifications and information herein are available for historical reference only.
The TDA1566 is a car audio power amplifier with a complementary output stage realized in BCDMOS. The TDA1566 has two Bridge Tied Load (BTL) output stages and comes in a HSOP24 or DBS27P package.
The TDA1566 can be controlled with or without I²C-bus. With I²C-bus control gain settings per channel and diagnostic trigger levels can be selected. Failure conditions as well as load identification can be read with I²C-bus. The load identification detects whether the outputs of a BTL channel are connected with a DC or AC load and discriminates between a speaker load, a line driver load and an open (unconnected) load.
The TDA1566 can be configured in a single BTL mode and drive a 1 Ω load. For the single BTL mode it is necessary to connect on the Printed-Circuit Board (PCB) the outputs of both BTL channels in parallel.
Buy/Parametrics
1 result
Exclude 1 NRND
Part | CAD Model | Status | THD % | Output power (W) | Gain (dB) | Amplifier type | Output Impedance (Ohm) | Package Type |
|---|---|---|---|---|---|---|---|---|
No Longer Manufactured | 0.3 | 75 | 26 | Stereo Class AB | 1 | HSOP24 |
2 documents
Compact List
Data Sheet (1)
Package Information (1)
Design Resources
Support
Recently viewed products
There are no recently viewed products to display.
