Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
High-Speed CAN Transceiver with Standby Mode
The TJA1040 is the interface between the controller area network (CAN) protocol controller and the physical bus. It is primarily intended for high speed applications, up to 1 MBaud, in passenger cars. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.
The TJA1040 is the next step up from the TJA1050 high speed CAN transceiver. Being pin compatible and offering the same excellent EMC performance, the TJA1040 also features:
- An ideal passive behavior when supply voltage is off
- A very low-current standby mode with remote wake-up capability via the bus.
This makes the TJA1040 an excellent choice in nodes, which can be in power down or standby mode in partially powered networks.
S08 Package
Product Details
Features
Key Features
- Fully compatible with the ISO 11898 standard
- High speed (up to 1 MBaud)
- Very low-current standby mode with remote wake-up capability via the bus
- Very low electromagnetic emission (EME)
- Differential receiver with high common-mode range for electromagnetic immunity (EMI)
- Transceiver in unpowered state disengages from the bus (zero load)
- Input levels compatible with 3.3 V and 5 V devices
- Voltage source for stabilizing the recessive bus level if split termination is used (further improvement of EME)
- At least 110 nodes can be connected
- Transmit Data (TXD) dominant time-out function
- Bus pins protected against transients in automotive environments
- Bus pins and pin SPLIT short-circuit proof to battery and ground
- Thermally protected
Buy/Parametrics
1 result
Exclude 1 NRND
Part | Order | CAD Model | Status | Recommended Orderable Part Number | New Generation Recommendation | MCU I/O Interface (V) | Low Power Modes | Data Rate [max] kbps | Package Type | CAN Channels | Product Category | Supply Voltage [Min to Max] (V) | Data Rate [min] kbps | Voltage on bus pins [Min-Max] (V) | VIO Option Available | GPIO | Supported standards | Product Application |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Not Recommended for New Designs | TJA1040T/CM,118 | TJA1044GT | 5.0 | Standby Mode | 1000.0 | SO8 | 1 | High-Speed CAN | 4.75 to 5.25 | 40.0 | -27 to 40 | N | 8 | SAE J2284-2, SAE J2284-5 | Automotive, Industrial |
Documentation
Quick reference to our documentation types.
1-5 of 8 documents
-
Data Sheet
High-speed CAN transceiver with standby mode
-
Application Note
TJA1040 high speed CAN transceiver
-
Application Note
TJA1041/1041A high speed CAN transceiver
-
Application Note
TJA1050 high speed CAN transceiver
1-5 of 8 documents
-
Data Sheet
High-speed CAN transceiver with standby mode
-
Application Note
TJA1040 high speed CAN transceiver
-
Application Note
TJA1041/1041A high speed CAN transceiver
-
Application Note
TJA1050 high speed CAN transceiver
Design Resources
Software
Quick reference to our software types.
1 software offerings
-
BSPs and Device Drivers
Micro CANopen Plus
To find additional partner offerings that support this product, visit our Partner Marketplace.
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
3 engineering services
-
Independent Design House (IDH)
Hardware Design Services
-
Independent Design House (IDH)
Hardware/Software Engineering Services
-
Independent Design House (IDH)
Embedded Software Design
To find additional partner offerings that support this product, visit our Partner Marketplace.